7
English
This receiver is equipped with the following video terminals—
composite video, S-video, and component video terminals.
• If your video components have S-video (Y/C-separation) and/or
component video (Y, P
B
, P
R
) jacks, connect them using an S-
video cable (not supplied) or component video cable (not
supplied). By using these terminals, you can get a better picture
quality in the order:
Component > S-video > Composite
IMPORTANT:
The video signals from one type of these input jacks are
transmitted only through the video output jacks of the same
type.
Therefore, if a recording video component and a playing
video component are connected to the receiver through the video
terminals of different type, you cannot record the picture. In
addition, if the TV and a playing video component are connected
to the receiver through the video terminals of different type, you
cannot view the playback picture on the TV.
Turn off all components before making connections.
• When you connect other components, refer also to their
manuals.
DO NOT use a TV through a VCR or a TV with a built-in
VCR; otherwise, the picture may be distorted.
CAUTION:
If you connect a sound-enhancing device such as a graphic
equalizer between the source components and this receiver, the
sound output through this receiver may be distorted.
If your video components have AV COMPU LINK terminal
See also page 32 for detailed information about the connection
and the AV COMPU LINK remote control system.
Connecting video components
Do not connect the AC power plug to the wall outlet until all connections are completed.
7
Connecting a DVD recorder or DVD player with its stereo output jacks:
Å
To component video output
• Connect Y, P
B
, and P
R
correctly.
ı
To left/right audio channel output
Ç
Only for DVD recorder:
To left/right audio channel
input
Î
To composite video output
‰
To S-video output
Ï
Only for DVD recorder:
To S-video input
Ì
Only for DVD recorder:
To composite video input
White
Red
DVD recorder or
DVD player
White
Red
Stereo audio cable
(not supplied)
Green
Blue
Red
Component video cable (not supplied)
S-video cable (not supplied)
Composite video cable
(not supplied)
NOTES
•
When connecting a DVD recorder or DVD player to the
component video input jacks, select the component video input
mode (DVD VIDEO IN) correctly. If you do not, you cannot view
the playback picture on the TV or the AV COMPU LINK remote
control system cannot operate properly. See page 20 for details.
•
You can enjoy digital sound if using a digital coaxial or optical
cable. When shipped from the factory, the audio input mode for
a DVD recorder and DVD player is set to use the digital coaxial
terminal (DIGITAL IN 1 (DVR/DVD)). For details of digital
connection, see page 10.
Composite video cable
(not supplied)
DVR
OUT(REC)
DVR/DVD
IN(PLAY)
Å
ı
Î ‰
Ï Ì
Ç
DVR
OUT(REC)
DVR/DVD
IN(PLAY)
Y
P
B
P
R
COMPONENT VIDEO
MONITOR
OUT
DVR/DVD
IN
VCR(DBS)
IN
06-07RX-D201S [C]_f.p65
05.2.15, 18:02
7
