72
English
CD player
After pressing CD, you can perform the following operations on the
CD player:
PLAY
: Starts playing.
4
: Returns to the beginning of the current (or
previous) track.
¢
: Skips to the beginning of the next track.
STOP
: Stops playing.
PAUSE
: Pauses playing. To release, press PLAY.
1 – 10, +10
: Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
CD player-changer
After selecting “CD DISC” by pressing CONTROL repeatedly, you
can perform the following operations on a CD player-changer:
PLAY
: Starts playing.
4
: Returns to the beginning of the current (or
previous) track.
¢
: Skips to the beginning of the next track.
STOP
: Stops playing.
PAUSE
: Pauses playing. To release, press PLAY.
1 – 6, 7/P
: Selects the number of a disc installed in a CD
player-changer.
After pressing CD, you can perform the following operations on the
CD player-changer:
1 – 10, +10
: Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
EXAMPLE:
• Selecting disc number 4, track number 12, and starting playback.
1.Press CONTROL repeatedly until “CD DISC” appears on
the remote’s display, then press 4.
2.Press CD, then press +10, 2.
If your CD changer is of 200-disc loading capability (except for
XL-MC100 and XL-MC301)
You can do the following operations using the 10 keys after pressing
CD:
1. Select a disc number.
2. Then select a track number (always enter two digits).
3. Start playback.
EXAMPLES:
• Selecting disc number 3, track number 2, and starting playback.
Press 3, then, 0, 2, then PLAY.
• Selecting disc number 10, track number 5, and starting playback.
Press 1, 0, then, 0, 5, then PLAY.
• Selecting disc number 105, track number 12, and starting
playback. Press 1, 0, 5, then 1, 2 then PLAY.
Turntable
After pressing PHONO, you can perform the following operations
on a turntable:
PLAY
: Starts playing.
STOP
: Stops operations.
CD recorder
After pressing CDR or selecting “CDR” by pressing CONTROL
repeatedly, you can perform the following operations on a CD
recorder:
PLAY
: Starts playing.
4
: Returns to the beginning of the current (or
previous) track.
¢
: Skips to the beginning of the next track.
STOP
: Stops playing.
PAUSE
: Pauses playing. To release, press PLAY.
1 – 10, +10
: Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Note:
When you start recording on the CD recorder, use the buttons on the
CD recorder itself or on the remote control supplied for it.
Cassette deck
After pressing TAPE/MD or selecting “TAPE” by pressing
CONTROL repeatedly, you can perform the following operations on
a cassette deck:
PLAY
: Starts playing.
REW
: Fast-winds the tape from right to left.
FF
: Fast-winds the tape from left to right.
STOP
: Stops operations.
PAUSE
: Pauses playing. To release, press PLAY.
¶
REC
: Press this button together with the PLAY button to
start recording (for Zone 1 operation only).
Press this button together with the PAUSE button to
enter recording pause (for Zone 1 operation only).
Note:
When connecting the cassette recorder to the TAPE/MD IN jacks,
change the source name to “TAPE”—initial setting (see page 27).
MD recorder
After pressing TAPE/MD or selecting “TAPE*” by pressing
CONTROL repeatedly, you can perform the following operations on
the MD recorder:
PLAY
: Starts playing.
4
: Returns to the beginning of the current (or previous)
track.
¢
: Skips to the beginning of the next track.
STOP
: Stops playing.
PAUSE
: Pauses playing. To release, press PLAY.
¶
REC
: Press this button together with the PLAY button to
start recording (for Zone 1 operation only).
Press this button together with the PAUSE button to
enter recording pause (for Zone 1 operation only).
Notes:
• When connecting an MD recorder to the TAPE/MD IN jacks, change
the source name to “MD” (see page 27).
*
Selecting “TAPE” will allow you to control the MD recorder.
EN68-84_RX-DP20VBK[C]f
03.6.12, 4:37 PM
72
