26
To tune in to a preset station
On the unit:
1. Press FM/AM.
The last received station of the last selected band
is tuned in.
• Each time you press the button, the band
alternates between FM and AM (MW/LW).
2. Press PRESET
5
/
∞
(inside
the front door) until you find
the channel you want.
From the remote control:
1. Press FM/AM.
The last received station of the last selected band
is tuned in.
• Each time you press the button, the band alternates between
FM and AM (MW/LW).
2. Press the 10 keys to select a preset
channel number.
• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 20, press +10 then 10.
• For channel number 30, press +10, +10,
then 10.
Selecting the FM Reception Mode
When an FM stereo broadcast is hard to
receive or noisy
You can change the FM reception mode while receiving an FM
broadcast.
• You can store the FM reception mode for each preset station.
Press FM MODE.
• Each time you press the button, the FM reception mode alternates
between “AUTO MUTING” and “MONO.”
AUTO MUTING:
When a program is broadcasted in stereo,
you will hear stereo sound; when in monaural, you
will hear monaural sounds. This mode is also useful to
suppress static noise between stations. The AUTO
MUTING indicator lights up on the display.
MONO:
Reception will be improved although you will lose the
stereo effect. In this mode, you will hear noise while
tuning in to the stations. The AUTO MUTING and
STEREO indicators go off.
Note:
When you press FM MODE on the remote control, be sure that
“TUNER” appears on the remote’s display. If not, press FM/AM first to
select the FM band, then press FM MODE.
LEFT
/
PRESET
RIGHT
/
PRESET
FM/AM
EFFECT
LIVENESS
FM MODE
RETURN
100+
1
2
3
4
5
6
7
/P
8
9
10
+
10
0
FM MODE
0
On the unit
(inside the front door)
From the remote control
EXIT
/
FM MODE
Receiving FM Stations with RDS
RDS (Radio Data System) allows FM stations to send an additional
signal along with their regular program signals. For example, the
stations send their station names, as well as information about what
type of program they broadcast, such as sports or music, etc.
• When tuned to an FM station which provides the RDS service, the
RDS indicator lights up on the display.
With the receiver, you can receive the following types of RDS
signals.
PS (Program Service) :
Shows commonly known station names
PTY (Program Type) :
Shows types of broadcast programs
RT (Radio Text)
:
Shows text messages the station sends
Enhanced Other Networks
:
Provides the information about the
types of the programs sent by other
RDS stations than the one being
received.
Notes:
• RDS is not available for AM (MW/LW) broadcasts.
• Not all FM stations provide RDS signals, nor do all RDS stations
provide the same services. If in doubt, check with local radio
stations for details on RDS in your area.
• RDS may not operate correctly if the station tuned is not
transmitting RDS signal properly or if the signal strength is weak.
To show the RDS information
You can see the RDS information the station sends on the display.
Press DISPLAY MODE on the remote control
while listening to an FM station.
• Each time you press the button, the display
changes to show you the following information:
PS (Program Service)
: While searching, “PS” appears and then the station names
will be displayed. “NO PS” appears if no signal is sent.
PTY (Program Type)
: While searching, “PTY” appears and then the type of the
broadcast program will be displayed. “NO PTY” appears if
no signal is sent.
RT (Radio Text)
: While searching, “RT” appears and then text messages the
station sends will be displayed. “NO RT” appears if no
signal is sent.
Notes:
• When you press DISPLAY MODE on the remote control, be sure
that “TUNER” appears on the remote’s display. If not, press FM/AM
first, then press DISPLAY MODE.
• If searching finishes at once, “PS,” “PTY,” and “RT” will not appear
on the display.
• Some special characters and marks may not be displayed correctly.
(The display cannot show accented letters, “A,” for instance, may
stand for accented “A’s” like “Å, Ä, Ã, Á, À, and Â.”)
STOP
DISPLAY MODE
FM/AM
PS
Canceled
PTY
RT
EN25-28_RX-DP20VSL[B]f.pm5
03.5.21, 18:52
26
