39
Sound Adjustments
Sound adjustment operations are easily done on the Adjustment menu. Some of the adjustments can also be done
directly using the buttons on the remote control.
Note:
When performing sound adjustments viewing the indications on the
main unit’s display, the indications shown are slightly different from
what are shown on the on-screen display.
This is because of the limited number of characters shown on the
main unit’s display.
Ex. • “PEQ SURR BACK” is shown as “PEQ SBACK” on the main
unit’s display.
• “TREBLE LEVEL” is shown as “TREBLE LVL” on the main unit’s
display.
NOTICE—
•
If Analog Direct is in use (see page 23), you cannot make
any sound adjustments using the Adjustment Menu.
• Items on the menus shown above are all set to the initial
values when shipped from the factory.
• Some of the menus or some items on the menu cannot be
shown or cannot be adjusted. (For details, see the respective
explanations in this section.)
Adjustment Menu Configuration
ADJUST MENU
1
PARAMETRIC EQ
(See page 42.)
2
MIDNIGHT MODE
(See page 43.)
3
EFFECT ADJUST
(See page 43.)
(When DSP is activated)
(When Pro Logic II Music
is activated)
(When one of the other modes
is activated, or when the source is
“DVD MULTI” or “EXT 7.1CH”)
(When Neo:6 Music
is activated)
EN39-44_RX-DP20VSL[B]f.pm5
03.5.21, 18:55
39
