41
Menu Operating Procedure
Ex. When adjusting the DSP effects
On the TV screen
1. Press ADJUST MENU.
• Make sure one of the DSP modes except “ALL CH
STEREO” is selected.
2. Press
fi
or
%
(DOWN or UP) repeatedly
to select the desired submenu.
• In this example, select “EFFECT ADJUST”
submenu.
3. Press SET.
4. Set a desired item on the submenu.
1
Press
fi
or
%
(DOWN or UP)
repeatedly to select an item.
2
Press
#
or
@
(RIGHT or LEFT) to set
the item.
• In this example, set “ROOM SIZE” to “5.”
5. Set other items on the same submenu if
necessary.
1
Press
fi
or
%
(DOWN or UP)
repeatedly to select another item on
the same submenu.
2
Press
#
or
@
(RIGHT or LEFT) to set
the item.
• In this example, set “LIVENESS” to “5.”
Operations
On the main unit’s display
Press the button until “EFFECT ADJ”
appears.
To return to the previous screens
Press EXIT.
Each time you press the button, the on-screen display menu returns
to the one previously displayed. (On the main unit’s display, the
indications also change accordingly.)
The selected submenu appears.
The first item on the selected submenu
appears (with the current setting shown
on the lower line of the main display).
dB
SPEAKERS
VOLUME
1
The submenu names previously
selected appears.
dB
SPEAKERS
VOLUME
1
To erase the menu (to return to the regular screen)
Press ADJUST MENU.
dB
SPEAKERS
VOLUME
1
dB
SPEAKERS
VOLUME
1
dB
SPEAKERS
VOLUME
1
Move
to “EFFECT ADJUST.”
ADJUST MENU appears.
EN39-44_RX-DP20VSL[B]f.pm5
03.5.21, 18:55
41
