1-10 (No.22019)
3.1.10 Removing the audio signal 2 board & video board & S video board
(See Fig.9 to 11)
• Prior to performing the following procedure, remove the top
cover, rear panel, Y/C separator board, DSP board and audio
signal 1 board.
(1) Disconnect the harness from the connector
CN973
on the
front AV in board (see 2-3.Front panel assembly section/
fig.2).
(2) Disconnect the harness from the connector
CN324
on the
audio signal 2 board.
(3) Remove the audio signal 2 board from the connector
CN15
and
CN6
on the input base board.
(4) Remove the video board from the connector
CN7
on the
input base board.
(5) Remove the S video board from the connector
CN8
on the
input base board.
3.1.11 Removing the V compo 1 board
(See Fig.9 to 11)
• Prior to performing the following procedure, remove the top
cover and rear panel.
(1) Remove the V compo 1 board from the connector
CN9
on
the input base board.
Fig.9
Fig.10
Fig.11
Video board
V compo 1 board
Audio signal 2 board
S video board
CN324
Input base board
FRONT
Connection between the Input base board and each board.
CN15/CN6
CN7
CN8
CN9
Audio signal 2 board (CN325/CN321)
Video board (CN401)
S video board (CN451)
V compo 1 board (CN501)
Input base board
CN15
CN6
CN7
CN8
CN9
FRONT