13
1. Open the jack cover of the speaker.
2. Connect the supplied micro-USB cable to the speaker, and then
connect the other end to a computer.
3. The light of the button will flash during charging. The light will
go off automatically after fully charge.
• Use the supplied micro-USB cable only, and connect directly to a computer.
Charging will not be completed properly by an indirect connection, such
as via a USB hub.
• If the unit is not used for a long time, the light of the button may not light
up when you connect the micro-USB cable to charge the unit. In this case,
do not disconnect the micro-USB cable from the unit and wait until the light
of the button lights up.
• Charging time varies depending on conditions of use of the battery and the
output voltage of your charging device.
• The unit will get warm during charging. This is not a malfunction.
Battery Life
When using the
Bluetooth
® connection, the speaker has approx
7 hours of playback time in fully charge status and in medium
sound level. Time stated above may vary, depending on ambient
temperature or conditions of use.
SP-AD50-B_W_IB_RC_150421_Annie.indd 13
21/4/15 下午5:23