9
English
English
• To check the current source, press and
hold
[DIMMER/STATUS]
. The front
indicator lamp will light for 3 seconds.
(hold)
3
Adjust the volume.
(press repeatedly)
(press repeatedly)
Remote
control
System
Adjustable range:
MIN
,
1
to
39
,
MAX
• When the volume is set to the minimum
or maximum value, the front indicator
lamp lights for an extended period.
Temporarily muting the system
• To restore the sound, press the button
again or press
[/−]
.
Turning off the System
The System will go into one of the 2 following
standby modes, depending on how the
System is turned off.
Turn the System on automatically when
enjoying AirPlay/DLNA (network standby)
In network standby mode, an AirPlay/DLNA
device can be used to turn the System power
on automatically (Auto power on) by selecting
the System, "SP-AP1", and starting playback.
Make sure that the wireless function is
ON
.
• To enter network standby mode, press
[
]
(standby/on).
Remote
control
System
• The STANDBY indicator lights faintly in
white when in network standby mode.
• To use network power on, set up a network
between the System and an AirPlay/DLNA
device. (page 10)
• See page 14 for information about AirPlay/
DLNA devices.
• The Auto power on function does not work
for BLUETOOTH connections.
Put the System into an energy efficient
standby mode (normal standby)
Press and hold
[
]
(standby/on) for 4
seconds or longer with the wireless function
turned
ON
.
Remote
control
System
(press and hold)
(press and hold)
• The STANDBY indicator lights in red when
in normal standby mode.
• When the wireless function is
OFF
, the
system enters normal standby mode,
regardless of the length of time the
[
]
(standby/on) button is pressed for.
Lights faintly in
white
Lights in red
When in network
standby mode
When in normal
standby mode
SP-AP1[E]̲04.indd 9
SP-AP1[E]̲04.indd 9
2013/10/16 14:19
2013/10/16 14:19
Downloaded from www.vandenborre.be
