56
56
56
56
Operating Other Manufacturers’ Video Equipment
Operating Other Manufacturers’ Video Equipment
Operating Other Manufacturers’ Video Equipment
Operating Other Manufacturers’ Video Equipment
English
To change the transmittable signals for oper-
ating a CATV converter or DBS tuner
1
Slide the remote control mode to “CATV/
DBS.”
2
Press and hold TV/CATV/DBS
.
Keep press until step 4 is finished.
3
Press TV.
4
Enter manufacturer’s code (2 digits) using
buttons 1 - 9, and 0.
See the list below to find the code.
Examples:
For a JVC product, press 2, then 1.
For a Pioneer product, press 1, then 3.
5
Release TV/CATV/DBS
.
After setting the remote control mode selector to “CATV/
DBS,” you can perform the following operations on the
CATV convertor or on the DBS tuner:
Note:
• Refer to the manual supplied with your CATV converter or
DBS tuner.
6
Try to operate your CATV converter or DBS
tuner by pressing TV/CATV/DBS
.
When your CATV converter or DBS tuner turns on or off, you
have entered the correct code.
If there are more than one code listed for your brand
of CATV converter or DBS tuner,
try each one until the
correct one is entered.
Manufactures’ codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
To change the transmittable signals for oper-
ating another manufacturer’s VCR
1
Set the remote control mode to “AUDIO/TV/VCR.”
2
Press and hold VCR
.
Keep press until step 4 is finished.
3
Press VCR.
4
Enter manufacturer’s code (2 digits) using
buttons 1 - 9, and 0.
See the list below to find the code.
Examples:
For a JVC product, press 0, then 1.
For a Funai product, press 1, then 0.
5
Release
VCR .
Following button can be used for operating the VCR (with the
remote control mode selector set to “AUDIO/TV/VCR”):
VCR
: Turns on and off the VCR.
After pressing VCR (with the remote control mode selector
set to “AUDIO/TV/VCR”), you can perform the following
operations on the VCR:
Note:
• Refer to the manual supplied with your VCR.
6
Try to operate your VCR by pressing VCR
.
When your VCR turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand
of VCR,
try each one until the correct one is entered.
Manufactures’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
TV/CATV/DBS :
Turns on and off the CATV con-
verter or DBS tuner.
C/–:
Changes the channels.
1 - 10, 0, 100+ (+10):
Selects the channel.
100+ (+10) button will function as
the ENTER button if your equip-
ment requires pressing ENTER af-
ter selecting a channel number.
Manufacturer
Code
ECHOSTAR
21
GI JERROLD
01, 02, 03, 04,
05, 06, 07, 08
HAMLIN/REGAL
15, 16, 17, 18
PIONEER
13, 14
RCA
19
SCIENTIFIC ATLANTA
09, 10
SONY
20
ZENITH
11, 12
PLAY:
Starts playback.
1
1
1
1
:
Rewinds a video tape.
¡
¡
¡
¡
:
Fast winds a video tape.
STOP:
Stops operation.
PAUSE:
Pauses.
¶
¶
¶
¶
REC:
Starts recording or enters recording
pause.
C/– :
Changes the TV channels on the VCR.
1 - 10, 0, 100+ (+10):
Selects the TV channels.
100+ (+10) button will function as
the ENTER button if your VCR re-
quires pressing ENTER after select-
ing a channel number.
Manufacturer
Code
Manufacturer
Code
JVC
01, 02,
03
PHILIPS
09
EMERSON
11, 26
RCA
05, 06
FISHER
29
SAMSUNG
24
FUNAI
10, 14,
15, 16
SANYO
21, 22,
23
GOLD STAR
12
SHARP
27, 28
HITACHI
04
SHINTOM
30
MITSUBISHI
13
SONY
18, 19,
20
NEC
25
ZENITH
08
PANASONIC
07, 17
TH-A9(UW).book Page 56 Monday, March 12, 2001 9:17 AM
