Introduction
14
English
Listening to Radio Broadcast
s
Listening to Radio Broadcasts
Listening to Radio Broadcasts
This product can receive FM and AM radio broad-
casts.
Some countries space AM stations 9 kHz apart,
and other countries use 10 kHz spacing.
On the main unit ONLY:
■
When the main unit is turned off
To select 10 kHz spacing, while holding down
on
the main unit, press
on the main unit to turn on
the power. "AM 10 kHz SP (Spacing)" appears on
the display window.
To select 9 kHz spacing, while holding down
on the main unit, press
on the main unit to turn
on the power. "AM 9 kHz SP" appears on the dis-
play window.
NOTE
• If the spacing is switched, the memory in which the
radio stations were stored will be erased.
1
Press
to select "FM" or "AM".
Example: Display while an FM radio broadcast
is received.
2
Press
or
repeatedly to
select a radio station (frequency).
• You can also select a radio station using the
automatic tuning.
Automatic tuning:
Hold down
or
until the frequency
starts changing, and then release the button.
When the main unit has received a broadcast,
the frequency automatically stops changing.
To quit the function while searching for a broad-
cast, press
or
.
• When the main unit has received an FM ste-
reo broadcast, "STEREO" lights up.
NOTE
• If an FM stereo broadcast is difficult to hear
because of noise, you may be able to hear more
easily by pressing
to switch the sound to mon-
aural reception. In this case, "MONO" lights up. To
return the sound to stereo reception, press
again or select another FM radio station.
Setting the AM Tuner Spacing
Number buttons
Selecting a Radio Station
Stereo indicator
Preset number (
page 15)
Frequency
UX-Q1[UB]-06.fm 14 ページ ２００４年７月２８日 水曜日 午前１０時３９分
