23
4-7 Contents of Menu Switches
4 ON-SCREEN/MENU SWITCHES
[ ]: Factory setting • The lower section in the items and set values columns shows what’s on the VCR’s display.
Screens
Items
Set values
Function
ON
TONE
0 IRE
SCREEN
30 IRE
MODE
70 IRE
[100] IRE
0
30
70
100
The higher the numeric value, the brighter the display.
The brightness is shown on the line under the setting value.
0 IRE: ********** (black indication)
30 IRE: ***
70 IRE: *******
100 IRE: ********** (white indication)
POWER
[ON]
LOSS CNT
OFF
ON
OFF
05D 1
DAY
[ON]
OFF
ON
OFF
Sets whether or not the year, month and day are shown on screen.
ON: Shown.
OFF: Not shown.
05D 2
TIME
[ON]
OFF
ON
OFF
Sets whether or not the time is shown.
ON: Shown.
OFF: Not shown.
05D 3
Sets whether or not the recording speed mode is shown on screen.
ON: Shown.
OFF: Not shown.
REC SPEED
ON
[OFF]
ON
OFF
05D 4
ALARM CNT
ON
[OFF]
ON
OFF
Sets whether or not the number of alarms is shown on screen.
ON: Shown.
OFF: Not shown.
05D 5
05D 6
F. DISP
REC TALLY
[ON]
OFF
ON
OFF
FDiP 1
VIDEO MODE
V. PULSE
[OFF]
ON
OFF
ON
ViD 1
Sets whether or not a warning indication (error code display) is shown
when a problem occurs.
ON: Shown.
OFF: Not shown.
Sets whether or not the [REC] indicator lights in the Record mode.
ON: Lights.
OFF: Does not light .
Sets whether or not the number of power losses is shown on screen.
ON: Shown.
OFF: Not shown.
WARNING
[ON]
OFF
ON
OFF
Sets whether or not the V. pulse is added during ordinary playback
(2H and 6H modes : U model, 3H mode : E model).
OFF: V. pulse is not added. Normally set to this position.
ON: V. pulse is added.
• When a camera synchronized with the power supply is switched with
a switcher, the picture may be distorted at the switching point. In
this case, set this switch to “ON”. This locks the monitor, preventing
the picture distortion at switching points (only in the 2/6H mode : U
model, 3H mode : E model).
• V. pulse is always added in the Still mode and Timelapse mode.
(VCR's display)
FDiP 2
24
4-7 Contents of Menu Switches
VTR MODE
HDR
[OFF]
ON
OFF
ON
[ ]: Factory setting • The lower section in the items and set values columns shows what’s on the VCR’s display.
4 ON-SCREEN/MENU SWITCHES
Sets the mode during timelapse recording.
OFF: Records in the normal timelapse mode (timelapse recording with
the SP heads).
ON: Records in the HDR timelapse mode (timelapse recording with
the EP heads). Refer to page 28.
Function
Screens
Items
Set values
UTR 1
(VCR's display)
Enables or disables automatic external timer recording or automatic
restart of recording after a power failure.
OFF: External timer recording or automatic recording after power
failure does not function regardless of whether power is supplied
or not.
ON: Recording starts automatically when power is turned on.
POWER ON
[OFF]
REC
ON
OFF
ON
Sets whether or not Recording Check is automatically performed at the
beginning of a tape in the Repeat Recording mode.
OFF: Automatic recording check function is disabled.
ON: Automatic recording check function is enabled.
AUTO REW
[OFF]
ON
OFF
ON
Sets whether or not the tape is rewound automatically when the tape
ends.
OFF: The tape stops at the end.
ON: The tape automatically rewinds and enters the Stop mode (auto
REW).
* When the repeat recording/playback function is set to “ON”, the
repeat function has priority.
* If the menu switch <TAPE END MODE> on the <ALARM/SENSOR
MODE> screen is set to “STOP”, the Stop mode is engaged when
the tape ends even when there is an alarm or sensor recording. The
tape does not rewind.
Sets whether or not the counter memory function is activated.
OFF: The counter memory function is not activated.
ON: The counter memory function is activated.
When the tape reel counter value reaches 0000 in the FF/REW
mode, the VCR enters the Stop mode automatically.
* The counter memory function is not available during repeat recording/
playback, auto REW, alarm search, alarm scan and date/time search.
CNT MEM SW
[OFF]
ON
OFF
ON
UTR 2
UTR 3
UTR 5
Enables or disables the repeat playback function.
OFF: The repeat playback function is disabled.
ON: When the tape ends, it is automatically rewound and played back
again from the beginning.
REPEAT PLAY
[OFF]
ON
OFF
ON
UTR 6
Enables or disables the repeat recording function.
OFF: The repeat recording function is disabled.
ON: When the tape ends, it is automatically rewound and recording
starts again from the beginning. When set to “ON”, the [REPEAT]
indication on the VCR’s display lights.
* If the menu switch <TAPE END MODE> on the <ALARM/SENSOR
MODE> screen is set to “STOP”, the Stop mode is engaged when
the tape ends even when there is an alarm or sensor recording. The
repeat recording is not executed.
* When this menu switch is set to “ON”, externally activated recording
is not executed.
REPEAT REC
[OFF]
ON
OFF
ON
UTR 7
AUTO REC
[OFF]
CHECK
ON
OFF
ON
UTR 4
U model on
