Importing Data from an
i.LINK-compatible Device to
the HDD
Data on devices connected to the i.LINK terminal can be
imported to the HDD as follows.
0
Video formats that can be imported:
DV and HDV content
Memo :
0
Only titles that are not copyright-protected can be imported.
0
Devices that have in-built copyright protection such as
D-VHS and digital tuners cannot be connected. This unit only
allows import from tape media.
0
Importing will not be performed if no tape has been inserted
into the HDV/DV camera.
0
Importing will be cancelled when the mode is changed from
HDV to DV or vice versa.
0
For camcorders that support both HDV and DV recording, use
only one of the modes for recording and playback.
0
There is no support for editing using a connected PC.
0
Only one i.LINK device can be connected to this unit at a time.
Note :
0
Turn off the power for this unit and the connecting device
when connecting using an i.LINK compatible device.
0
Do not unplug the i.LINK cable while importing to the HDD is
in progress.
Doing so may result in loss or damage of the titles.
0
For example, during full import of HDV content from JVC
GY-HD100 via i.LINK connection, the beginning of the image
may not be captured if GY-HD100 is not set as follows.
(1) Set the [IEEE1394] switch at the rear of the GY-HD100
unit to [HDV] or [DV] according to the recorded content.
(2) Set [MENU]/[VIDEO FORMAT]/[PB TAPE] on the
GY-HD100 unit to [HDV] or [DV].
(As with (1), set according to the recorded content. Setting to
[AUTO] is not allowed.)
(3) Check to ensure that the [HDV] or [DV] lamp on the side
of the GY-HD100 unit is lit.
(Check to ensure that the lamp that is lit corresponds to the
setting in (1) and (2).)
When importing from a tape that contains data captured in
the HDV recording and DV recording modes, change the
video camera setting according to each recording mode,
check to ensure that the corresponding lamp in (3) is lit, and
choose to start import from the current position.
Preparations
1
Connect the device (camera, etc.) to this unit
using an i.LINK cable
.
HDV/DV IN
REC
HDD
REC
BD
REC
MODE
INPUT
ONE TOUCH
DUBBING
SELECT
HDD
MEDIA SELECT
BD/SD
Memo :
0
After the device (camera, etc.) has been connected using an
i.Link cable, turn on the power of the device and switch it to
playback mode. (refer to the device’s (camera, etc.)
instruction manual for more details.)
0
“HDV/DV RDY” appears on the display window of the unit
when an i.LINK device is recognized.
2
Press the [DUBBING] button on the remote
control unit
0
The importing screen appears.
.
75$
5&
&+5%
*&8&8
&+5%
&+5%
&+5%
&+5%5&
126+10
1-
4'6740
':+6
5'.'%6
&7$$+0)
56'2
5'.'%6+/2146&7$$+0)
*&&
*&&
*&&
*&&
61*&&
61&8&
&+5%%12;
%#0%'.
0':6
&7$$+0)
8+&'1
2+%674'
3
Select “HDV/DV
h
HDD” in the importing screen,
and press the [OK] button
0
A check mark is added to the “HDV/DV
h
HDD” item.
4
Select “NEXT”, and press the [OK] button
0
The import selection screen appears.
Imports data from the beginning
You can import videos from the beginning till the end as follows.
If the current position is halfway through the tape, import after
rewinding the tape to the beginning.
1
Select “IMPORT FROM BEGINNING”, and press
the [OK] button
0
A check mark is added to the “IMPORT FROM
BEGINNING” item.
2
Select “NEXT”, and press the [OK] button
.
*&&
*&8&8
&7$$+0)
56'2
5'.'%66*'/'6*1&1(+/2146
+/2146(41/$')+00+0)
+/2146(41/%744'06215+6+10
%#0%'.
$#%-
0':6
':+6
5'.'%6
1-
4'6740
&7$$+0)
126+10
0
A recording mode selection screen appears.
42
Importing Data from an i.LINK-compatible Device to the HDD
Dubbin
g/Impor
tin
g