JVC SR-L910UA, Instructions Manual

28

COUNT/

CLOCK

TIME

MODE

TIMER

REC

AL/PL

RESET

MENU

SHIFT/TRACKING

SET/V.LOCK

RESET

/CANCEL

7-3 Timer Recording

Two types of timer recording are available: daily timer (by specifying the date) and weekly timer (by specifying the day of the

week).

• Daily timer

: Set the date to any date within one year of the current date.  Up to 8 programs can be set.

• Weekly timer : Set the day of the week. Recording will automatically be performed on that day each week.

You can program the timer using the on-screen menu display.

[OPERATE] button

[SHIFT–] button

[TIMER REC] button

[SET–] button

[SET+] button

[SHIFT+] button

[MENU] button

Note:
• Timer programming is not possible if the date and time have not been set.

Preparation
• Make sure all necessary equipment is properly connected to the input/output connectors on the rear panel.
• Check the current time.
• Load a cassette with the safety tab in place.  If the power is off, loading the cassette automatically turns the VCR on

(auto power on function).

1

Turn on this unit and the monitor and engage the Stop mode.

2

Press the [MENU] button.

[

The main menu screen is displayed on the monitor.

3

Press the [SHIFT +] or [SHIFT -] button to move the cursor arrow to
<PROGRAM TIMER> in the main menu, then press the [SET +] or [SET -]
button.

[

The daily timer program setting screen is displayed.

• <DAILY> is shown on the second line of the daily timer program setting

screen.

• If the date and time have not been set, the date and time setting

screen will be shown.  Once the correct date and time have been set,
repeat steps 2 and 3.

n

When the weekly timer program setting screen is displayed,
<WEEKLY> is shown on the second line.
• Press the [SHIFT +] or [SHIFT -] button to set the cursor arrow to

<WEEKLY> and press the [SET +/-] or [SET -] button.

[

The cancel program setting screen is displayed.

n

When the cancel program setting screen is displayed, <CANCEL> is
shown on the second line.
• Press the [SHIFT +] or [SHIFT -] button to set the cursor arrow to

<CANCEL> and press the [SET +/-] or [SET -] button.

[

The daily timer program setting screen is displayed.

MAIN  MENU

PROGRAM   TIMER
FUNCTION
ALARM   IN
POWER  LOSS
HOUR  METER
CLOCK   ADJUST

PRESS  (SHIFT, SET)
PRESS  (MENU)    TO    END

PROGRAM  TIMER

 ( DAILY)   S T A R T   E N D     MODE
1. – – – – –   – – : – –   – – : – –   – – H
2. – – – – –   – – : – –   – – : – –   – – H
3. – – – – –   – – : – –   – – : – –   – – H
4. – – – – –   – – : – –   – – : – –   – – H
5. – – – – –   – – : – –   – – : – –   – – H
6. – – – – –   – – : – –   – – : – –   – – H
7. – – – – –   – – : – –   – – : – –   – – H
8. – – – – –   – – : – –   – – : – –   – – H

PRESS  (SHIFT,   SET,   RESET)
PRESS  (MENU)      TO    END

PROGRAM  TIMER

 (WEEKLY)  S T A R T   E N D     MODE
   ( MON )

– – : – –   – – : – –   – – H

   ( T U E )

– – : – –   – – : – –   – – H

   ( WED )

– – : – –   – – : – –   – – H

   ( T H U )

– – : – –   – – : – –   – – H

   ( F R I )

– – : – –   – – : – –   – – H

   ( S A T )

– – : – –   – – : – –   – – H

   ( SUN )

– – : – –   – – : – –   – – H

PRESS  (SHIFT,   SET,   RESET)
PRESS  (MENU)      TO    END

Main menu screen

Daily timer program setting screen

Weekly timer program setting screen

7  RECORDING

Setting the daily timer