Masterpage:Right-NoTitle0
EN
29
Filename [SR-V10E2-EN.fm]
Page 29
September 3, 2002 10:34 am
D
Set the tape speed.
Press
SP/LP/EP
(
p
).
●
It is not possible to select EP mode if “COLOUR SYSTEM” is
set to “MESECAM”
. (
墌
pg. 48
)
E
Set the VPS/PDC mode.
Press
VPS/PDC
(
number key “7”
) to select “ON” or
“OFF”.
●
If “VPS/PDC ON” is displayed on the TV screen, VPS/PDC is
set to ON.
●
If “VPS/PDC OFF” is displayed on the TV screen, VPS/PDC is
set to OFF.
墌
“VPS/PDC Recording” on page 31.
F
Access the Title Edit screen.
G
Enter the programme title.
H
Return to the normal screen.
Press
PROG
or
OK
. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears. If “PROGRAM OVERLAPPED” appears
on the TV screen and “Err” on the front display panel, see
page 34.
●
Repeat steps
1
–
8
for each additional programme.
I
Engage the recorder’s timer mode.
Press
#
(
TIMER
). The recorder turns off automatically and
“
#
” appears on the front display panel.
●
To disengage the timer mode, press
#
(
TIMER
) again.
NOTES:
●
To Change The Stop Time . . .
. . . press
STOP
+/–
after pressing
OK
in step
3
. You can
compensate for anticipated programme schedule delays.
●
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing
OK
in step
3
, press
WEEKLY
(
number key
“
9
”) for weekly serials or
DAILY
(
number key
“
8
”) for daily
serials (Sunday — Saturday). Either “WEEKLY” or “DAILY”
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
●
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, “PROGRAM FULL” appears on the TV screen and
“FULL” appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes (
墌
pg. 33).
●
Even if a power failure occurs, the recorder keeps your timer
programmes if the lithium battery is not exhausted.
Press the
number key “1”
.
The Title Edit screen appears.
●
You can access the Title Edit
screen only when “PROG.
NAVIGATION” is set to “ON”.
(
墌
pg. 46)
Press the
number keys
and
e
to enter characters, then
press
OK
. For details, refer to
“Entering Character” on
page 39.
Satellite Receiver Users
To timer-record a satellite broadcast using the S
HOW
V
IEW
system:
A
Set the Guide Program numbers for all satellite broadcasts
received on your satellite receiver. (
墌
pg. 49)
B
Perform steps
1
–
9
.
C
Set the satellite receiver to the appropriate channel before
the selected programme begins.
D
Leave the satellite receiver’s power on.
ATTENTION
Guide Program Number Set
“GUIDE PROG SET” appears after performing step
3
if the
Guide Program number for the S
HOW
V
IEW
number you
entered has not been set.
●
Press the
number keys
or
rt
to input the channel
position number on which your recorder receives that
station, then press
OK
or
e
to set the Guide Program
number. The S
HOW
V
IEW
Program screen appears.
(Example)
To timer-record a ZDF
programme with the
S
HOW
V
IEW
system.
* If your recorder receives ZDF on
the channel position 2, press
OK
or
e
after entering “2”.
SR-V10E2-EN.fm Page 29 Tuesday, September 3, 2002 10:34 AM
