22
EN
IN F-1
+
C
B
Basic
Playback
Features
Checking tape position
The tape position indicator
appears on the screen in the
following cases:
●
When you change the VCR
operation mode from the
stop mode to fast forward
or rewind mode.
●
When you perform an
Index Search (
pg. 24).
The position of “ ” in relation to “B” (Beginning) or “E”
(End) shows you where you are on the tape.
NOTES:
●
“SUPERIMPOSE” must be set to “ON”, or the indicator will
not appear (
pg. 59).
●
It may take a few seconds for the tape position indicator to be
displayed.
To reset the time counter,
press
C. RESET
on the
Remote. The counter reading becomes “0:00:00”. It is
also reset when a tape is inserted.
Playing back tape repeatedly
— Repeat Playback
You can play back a tape repeatedly (50 times).
While playing back a tape, press and hold PLAY (
3
)
for more than 5 seconds.
The play indicator (
#
) on the front display panel starts
flashing slowly, and a tape will be played back 50 times.
To stop playback,
press
STOP (
7
)
on the Remote or
STOP/EJECT
(
7
/
0
)
on the front panel.
NOTE:
For a cassette recorded in D-VHS mode, Repeat Playback is not
possible if the cassette was recorded in LS3 or LS5 mode.
B
BASIC PLAYBACK AND RECORDING (cont.)
A
B
E
●
Turn on the VCR and the TV, and select the AV
mode on the TV.
●
Set the
VCR/TV/CABLE/DBS
selector on the
Remote to “VCR”.
VCR
TV
CABLE
/DBS
D
C
B
VD400U-EN21-33
03.7.18, 1:03 PM
22
