38
EN
IN F-1
+
1
POWER
TIMER ( )
TIMER RECORDING (cont.)
You can directly program the VCR’s timer to record up to
24 broadcasts, as far as a year in advance. Remember,
the clock must be set before you can program the timer
(
墌
pg. 10).
1
Load a cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape, then load it
into the VCR.
●
The VCR turns on, and the counter is reset,
automatically.
2
Access VCR PLUS+ screen
Press
PROGRAM
.
3
Access Program screen
Press
START +/–
once.
4
Set program start time
Press
START +/–
repeatedly to enter
the time you want
recording to start.
●
Press and hold
START +/–
to
increase the time in
30-minute intervals.
5
Set program stop time
Press
STOP +/–
repeatedly to enter the time you
want recording to stop.
●
Press and hold
STOP +/–
to increase the time in
30-minute intervals.
6
Set program date
Press
DATE +/–
. (The current date is displayed on
the screen. The date you enter appears in its
place.)
7
Set channel number
Press
TV/VCR CH +/–
.
●
If you are using a DBS receiver, see
“ATTENTION FOR DBS RECEIVER USERS” on
next page.
●
Holding down
TV/VCR CH +/–
rapidly changes
the channel numbers.
Express Timer
Programing
VCR
TV
CABLE
/DBS
POWER
TIMER ( )
8
9
0
WEEKLY
DAILY
DBS
2
3
-
7
CONFIRM
CANCEL
– –:– – AM
STD (SP)
– –/– –/– –
– – –
8:00 PM
START TIME
STOP TIME
DATE
DAILY/WEEKLY
CH
SOURCE
TIMER PROGRAM
REC SPEED
SET PROGRAM WITH [+/–, REC SPEED
8=DAILY, 9=WEEKLY] THEN PRESS "CONFIRM"
START STOP DATE
CH
EXIT
PROG.
EVERY SUN
●
Turn on the VCR and the TV, and select the AV
mode on the TV.
●
Set the
VCR/TV/CABLE/DBS
selector on the
Remote to “VCR”.
VD400U-EN34-41
03.7.18, 1:06 PM
38
