Filename [VS30U_1a-EN.fm]
Masterpage:Left
32
EN
Page 32
January 31, 2002 3:35 pm
PLAYBACK/RECORDING ON VHS DECK (cont.)
Recording Features
(VHS deck)
Record One Program While Watching
Another
Once recording is in progress, all you need to do is to set
the channel controls on the TV for the station you wish to
view.
●
The program selected with the TV’s channel controls appears
on the TV screen, while the one selected with the VCR’s
CH
buttons is recorded on the tape.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the VCR off after
recording is finished.
1
Start recording.
Press
REC
(
7
) on the VCR.
2
Engage the ITR mode.
Press
REC
(
7
) again. “
o
” blinks and “0:30” appears on
the front display panel.
3
Set the recording duration.
If you want to record for more than 30 minutes, press
REC
(
7
) to extend the time. Each press extends recording
time by 30 minutes.
NOTES:
●
You can only perform ITR using the
REC
(
7
) button on the
VCR’s front panel.
●
You can play back a tape on DV deck while using the VHS
deck for Instant Timer Recording. However, remember that the
VCR will turn itself off when the Instant Timer Recording ends.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (in the right column) or timer recording
(
墌
pg. 42, 46, 48), the recording will resume automatically
when power is restored to the VCR unless the VCR’s memory
backup has expired.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
1
3
2
Record safety tab
VS30U_1a-EN.fm Page 32 Thursday, January 31, 2002 3:35 PM
