JVC SX-XD33, Service Manual

SX-XD33

1-4

1.

2.

3.

4.

5.

Prior to performing the following procedures, remove 
the cabinet.

Remove the screw marked A attaching the net to the 
cabinet.

By using tweezers and like which is inserted through 
the hole of  the net, remove the couple-face 
adhesive tape holding the net to the cabinet.

Remove the eight screws marked B  attaching the 
speaker to the cabinet.

Pull out the speaker from the cabinet toward you.

Remove the speaker harness from the speaker 
terminal.

Note:

Removing the satellite speaker                       
                                                (See Fig.4~6)    

When it is hard to remove the net, insert a 
tweezers, etc. Exercise care not to damage the 
cabinet and the speaker when inserting the 
tweezers and the like. For this purpose, insert 
cloth together with tweezers and the like.
Remove the holder of the net carefully because
the net is pinned on the cabinet with glue.
Please apply a small amount of  glue to the 
boss of the net on the occasion of attachment.  

Fig.5

Fig.6

Fig.4

B

Net

Cabinet

B

B

B

Horder

Both sides tape   

Speaker

terminal

Speaker

harness

Speaker

Speaker