15
7
To set the manufacturer’s code
1
Slide the remote control mode selector
to VCR/DBS.
2
Press DBS.
3
Press and hold
F
VCR/DBS.
Keep the button pressed until step 5 is finished.
4
Press ENTER.
5
Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples
:
For a GI Jerrold product: Press
0
, then
1
.
For a Sony product: Press
2
, then
0
.
*
“01” is the initial setting.
6
Release
F
VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
7
Operation
Aim the remote control at the DBS tuner or CATV converter.
IMPORTANT
Before using the remote control to operate a
DBS tuner or CATV converter;
1 Set the remote control mode selector
to
VCR/DBS
.
2 Press
DBS
.
The following buttons are available:
F
VCR/DBS
:
Turns DBS tuner or CATV converter on and
off.
CH +/–
:
Changes the channels.
1-10, 0,
h
10 (100+)
: Selects the channel.
7
To set the manufacturer’s code
1
Slide the remote control mode selector
to VCR/DBS.
2
Press VCR.
3
Press and hold
F
VCR/DBS.
Keep the button pressed until step 5 is finished.
4
Press ENTER.
5
Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples:
For a Philips VCR: Press
0
, then
9
.
For an NEC VCR: Press
2
, then
5
.
*
“01” is the initial setting.
6
Release
F
VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
7
Operation
Aim the remote control at the VCR.
IMPORTANT
Before using the remote control to operate a
VCR;
1 Set the remote control mode selector
to
VCR/DBS
.
2 Press
VCR
.
The following buttons are available:
F
VCR/DBS
:
Turns VCR on and off.
3
(play button):
Starts playback.
7
:
Stops operation.
8
:
Pauses playback.
y
:
Fast forwards video tape.
1
:
Rewinds video tape.
REC
:
Press this button together with
3
(play
button) to start recording or together with
8
to pause recording.
CH +/–
:
Changes the TV channels on the VCR.
NOTE
• When operating a VCR or DBS tuner/CATV converter;
– The source setting of VCR or DBS remains after you have changed
the remote control mode selector to
AUDIO
or
TV
. When operating
VCR or DBS tuner/CATV converter again, it is not necessary to
press
VCR
or
DBS
after setting the remote control mode selector.
Operating the DBS tuner or
CATV converter
Manufacturer
Code
Echostar
21
GI Jerrold
01
*
, 02, 03, 04, 05, 06, 07, 08
Hamlin
15, 16, 17, 18
Pioneer
13, 14
RCA
19
Scientific Atlanta
09, 10
Sony
20
Zenith
11, 12
Operating the VCR
Manufacturer
Code
Manufacturer
Code
JVC
01
*
, 02, 03
Philips
09
Emerson
11, 26
RCA
05, 06
Fisher
29
Samsung
24
Funai
10, 14, 15, 16
Sanyo
21, 22, 23
Gold Star
12
Sharp
27, 28
Hitachi
04
Shintom
30
Mitsubishi
13
Sony
18, 19, 20
NEC
25
Zenith
08
Panasonic
07, 17
Operating external components with the remote control
See page 14 for button locations.
EN_TH-C43[C]3.book Page 15 Tuesday, March 14, 2006 4:44 PM