32
4
Press ENTER.
Example:
5
Press Cursor
Y
/
5
to change the
setting.
6
Press ENTER.
The current VFP settings appear again.
7
Repeat steps 3 to 6 to adjust other
parameters.
8
Press VFP.
NOTE
• Although the setting display disappears in the middle of the
procedure, the setting at that time will be stored.
7
While stopped
1
Press PLAY MODE
repeatedly until program
window appears on the TV screen.
PRG indicator lights on the display window.
2
Follow the instructions that appear on
the TV screen to program the desired
chapters/tracks.
• For details on using the number buttons, see “How to use the
number buttons”. (See page 22.)
• The content’s numbers that you have to specify for
programming varies depending on the disc/file type:
– DVD VIDEO: Titles and chapters
– VCD, SVCD, CD: Tracks
– DVD AUDIO, MP3, WMA: Groups and tracks
• Before you program the tracks in bonus group on a DVD
AUDIO, perform the procedure of “Playing back a bonus
group” (see page 23) to turn off the BONUS indicator on the
display window.
• You can specify the chapters/tracks whose number is up to
99.
• There may be a case that the group or title number can be
entered even for discs that contain no groups or titles. In such
a case, press
ENTER
to proceed to the Track/Chapter column.
• When you press
ENTER
instead of the number buttons in the
Track/Chapter column, “ALL” appears and all the tracks or
chapters on the selected group or title are programmed as a
step.
To clear the programs one by one from the last entered
number
Press
CANCEL
repeatedly.
To clear all programs
Press and hold
CANCEL
.
You can also clear the program by turning off the system.
3
Press
3
(play button).
If all of the programmed tracks/files have been played back,
playback stops and the program window appears again. Note
that program setting remains.
To check the program contents
During playback, press
7
. Playback stops and the program window
appears.
To quit the Program mode
While stopped, press
PLAY MODE
repeatedly until both program
window and
disappear from the TV screen.
NOTE
• When the source is USB MEMORY, Program Playback does not
work.
• There may be a case where bonus group on a DVD AUDIO cannot be
played.
• The Resume function cannot be used with Program Playback.
•
DISC (1-5)
on the remote control and
DISC (1-5)
3
on the center unit
do not work during Program Playback.
• Program Playback may not work for some discs.
Program Playback
Advanced operations
See page 24 for button locations.
EN_TH-C43[C]3.book Page 32 Tuesday, March 14, 2006 4:44 PM
