9
Table Placement
•
Place the sound bar horizontally on a solid surface such as a TV
unit or shelves and align it centrally with the TV screen.
•
For best sound output and good airflow around the soundbar,
place your soundbar and subwoofer as shown on the right.
Wall Mount Installation
Positioning the Sound Bar
1, Open 4 holes in the wall referring to iron bracket for wall mounting, the spacing distance of the holes in the wall
is corresponding to the symmetrical position on sound bar (When measuring the position of wall mounting,
avoid the sound bar pads to put on the iron bracket, because pad is not flat, will not be sticky well on the
double-side tape on the bracket.)
2. Fix the plastic anchor in the 4 holes of the wall mounting bracket.
3. Then fix the supplied screws on the plastic anchor and tighten the screws to ensure that the wall mounting
bracket will not shake.
4. After fastening the screws, tear off one side of the two double-sided tapes in the supplied packaging,
and paste them on the right and left into the extension of the wall brackets according to the suitable position
where the Sound Bar on the iron bracket. (Not foot position of the sound bar)
5. Then tear off the other side of the double-sided tape attached to the iron bracket, place the Sound Bar on the
double-sided tape on the metal fittings, press it firmly and release it until it is completely stuck.
Wipe off any dirt such as oil on the adhesive surface of the sound bar before adhering.
Make sure that the adhesive is securely attached.
When peeling off the release paper of the double-sided tape, be careful not to get dirt such as finger oil on the
adhesive surface.
Be careful of deterioration of double-sided tape due to storage conditions.
The foot of the sound bar is not placed on the metal fittings because sound bar pads/foots are not flat
and will not sticky.
Please note
