TH-V70
1-8
Fig.9
Fig.10
Rear panel
J
L
H
K
G
Card wire
DSP/Audio
board
Card wire
CN806
CN805
CN592
Tuner
Compulink board
Removing the tuner
(See Figs. 9 and 10.)
1.
2.
3.
Disconnect the card wire from connector CN805 on
the main board.
From the rear side of the main body, remove the
two screws
L
attaching the tuner.
Take out the tuner from the bottom chassis.
Removing the compulink board
(See Figs. 9 and 10.)
1.
2.
3.
Disconnect the card wire from connector CN592 on
the compulink board.
From the rear side of the main body, remove the
screw
K
attaching the compulink board.
Take out the compulink board from the bottom
chassis.
Remove the top plate.
Remove the bottom panel.
Remove the top panel.
Remove the DVD mechanism assembly.
Remove the top plate.
Remove the bottom panel.
Remove the top panel.
Remove the DVD mechanism assembly.
Removing the DSP/Audio board
(See Figs. 9 and 10.)
1.
2.
3.
From the top side of the main body, remove a
screw
G
attaching the DSP/Audio board.
From the rear side of the main body, remove the
screw
H
and two screws
J
attaching the DSP/Audio
board.
Take out the DSP/Audio board from the bottom
chassis and then disconnect the card wire from
connector CN806 on the main board.
Remove the top plate.
Remove the bottom panel.
Remove the top panel.
Remove the DVD mechanism assembly.
[Reference]
Before attaching the DSP/Audio board, connect
the card wire to the connector CN806 on the
main board.
Summary of Contents for TH-V70
Page 55: ...TH V70 1 55 M E M O ...