UX-M3R
1-10
Fig.20
Fig.21
Fig.22
Fig.19
R
P
T
S
P
Q
U
Cassette door
Claw
f
Claw
g
Claw
h
Disengage the spring so
that it comes to the front
of the claw
h
.
Cassette door cover
Front panel assembly
Front panel assembly
Front panel assembly
Arm section
i
Arm section
k
Shaft section
j
Spring
Shaft section
m
Cassette door
sttoper
Cassette door
damper
Cassette
mechanism
assembly
Damper bracker
Key board
Spring
Bracket
R
REC/PB head wire
Tie band
Removing the key board
(See Fig. 19.)
Remove the ten screws
P
retaining the key board.
Removing the cassette door
(See Figs. 21 and 22.)
1.
2.
3.
4.
5.
Open the cassette door, disengage the spring
hooked across the front of the front panel assembly
and the cassette door in the outward direction, and
remove it from the claw
h
.
From the back side of the front panel assembly,
remove the two screws
U
retaining the bracket.
While pushing the arm section
i
of the cassette
door in the direction of the arrow, remove the shaft
section
j
of the cassette door from the front panel
assembly.
While pushing the cassette door arm section
k
in
the direction of the arrow, remove the shaft section
m
of the cassette door from the front panel
assembly.
Take out the cassette door from the back side of
the front panel assembly.
Remove the left and right side panels.
Remove the top cover.
Remove the front panel assembly.
Remove the cassette mechanism assembly.
Remove the cassette door cover.
[Caution] After assembly, apply a locking agent
to the screws Q and R.
<Front panel assembly section>
Removing the cassette mechanism
assembly (See Fig. 19.)
Remove the two screws
Q
and the two screws
R
retaining the cassette mechanism assembly.
Remove the tie band bundling the REC/PB head
wire.
Removing the cassette door damper
(See Fig. 19.)
Remove the screw
S
retaining the damper bracket
and take out the cassette door damper.
Removing the cassette door stopper
(See Fig. 19.)
Remove the two screws
T
retaining the cassette
door stopper and remove the cassette door
stopper.
Removing the cassette door cover
(See Fig. 20.)
1.
2.
Open the cassette door.
Slide the cassette door cover in the direction of the
arrow and disengage the two claws
f
and the two
claws
g
on the left and right of the cassette door
cover from the cassette door.
[Note] Use the following procedure to remove
only the cassette door cover.
This procedure does not require the
removal of exterior parts such as the
side panels.
[Caution] In the assembly, be sure to put the
spring around the shaft j before
attaching the cassette door.
1.
2.
