background image

English

– 16 –

A-B REPEAT

This feature is also applicable to the audio CD (except MP3-
CD). A certain scene or passage of the disc can be played
back repeatedly.

1

Press A-B on the remote control during playing
a CD/VCD to mark the repeat start point.
“A

” lights up on the display.

“B” starts blinking.

2 Press A-B again to mark the repeat end point.

“A

B” lights up steadily on the display.

The selected scene or passage is played repeatedly.

• The A-B repeat range can straddle two or more tracks

except when using a VCD with PBC version 2.0. The VCD
with PBC version 2.0 requires the A-B repeat start and end
points to be in the same track.

To return to normal playback,

 press A-B.

“A

B” disappears from the display.

RESUME

This feature is also applicable to the audio CD (except MP3-
CD).

In stop mode, press RESUME on the
remote control to start playback again
from where you have stopped.

• The resume function is not available if you have opened the

disc compartment or disconnected the unit’s power supply.

VIEW

This function allows you to scan through a VCD for a quick
review. In view mode,  the PBC function is automatically
switched off.

Press VIEW on the remote control.
On the TV screen, 9 pictures are
displayed. To view the previous/next
page, press 

4

 or 

¢

.

The first 20 seconds of each track is played.

To exit view mode,

 press the number buttons to play back the

desired track, or 

3

/

8

 to play the current selected track.

• If there’s no video tracks on the viewed page, you cannot

select the track directly using the number buttons.

VIEW

RESUME

A-B

Summary of Contents for UX-M6V




























Reviews: