12
~
Load a cassette with side A facing out. (Wind past the tape leader
before starting recording.)
Ÿ
Load a CD and close the CD holder.
!
Set to the CD mode.
⁄
Press the
7
button to set stop mode.
@
Select the required reverse mode (
or
).
●
When programmed play is required, program the required tracks
using the remote control. (See page 9.)
●
Select tracks with a total playing time which does not exceed the
tape length.
¤
Press the ONE TOUCH REC button; synchronized recording will
start.
(The recording indicator lights up.)
●
Recording starts in the forward direction and CD play starts auto-
matically.
●
After the CD player has played the entire CD or programmed tracks,
the deck stops automatically.
●
Non-recorded sections of approx. 4 seconds are automatically left
between tunes
●
To stop recording in the middle, press the
7
button. The cassette
deck also stops after 4 seconds.
Note:
●
During CD synchro recording, the
#8
, SEARCH (
4
,
¢
) buttons
and MULTI JOG dial do not function.
RECORDING
●
During recording, the ALC (Automatic Level Control) circuit auto-
matically optimizes the recording level, so manual recording level
adjustment is unnecessary.
●
Check that the safety tab on the cassette tape is not broken off.
Note:
This unit has recording characteristics suitable for
normal and CrO2 tapes. Normal and CrO2 tapes
have different characteristics from metal tapes.
Synchronized recording with the CD player
●
In this system, the CD player starts play when the cassette deck enters the recording mode.
Operate in the order shown
When non-recorded section between tunes is not required ...
1
Press the
#8
button twice. The CD Player enters the pause mode.
2
Press the ONE TOUCH REC button to start recording.
Note:
●
Depending on the CD used, non-recorded sections of different lengths
may be left between tunes.
●
CD complete recording function (Synchro recording mode only)
If the tape is reversed while a CD is being played, recording will be
done on the reverse side of the tape as follows:
* When less than 12 seconds of the last tune on the forward side of
the tape have been recorded, recording on the other side of the
tape will start from the beginning of the previous track.
* When more than 12 seconds of the last tune on the forward side of
the tape have been recorded, recording on the other side of the
tape will start from the beginning of the current track.
●
To record one track
Play the track to be recorded. Then pressing the ONE TOUCH REC
button locates the beginning of the track and enter the one track re-
cording mode. After the recording is finished, the CD player and cas-
sette deck both stop.
Recording from the radio or an external source connected to the AUX terminals
Operate in the order shown
~
Load a cassette with side A facing out.
(Wind past the tape leader before starting recording.)
Ÿ
Select the source to be recorded.
TUNER: Press the TUNER/BAND button. Tune to the required sta-
tion.
AUX:
Press the AUX button.
!
Select the required reverse mode (
or
).
⁄
Press the ONE TOUCH REC button.
AUTO REVERSE
A U T O T A P E S E L E C T O R
COMPACT
DIGITAL AUDIO
BAND
ONE TOUCH
REC
TAPE
OPEN
CD
TUNER
TIMER/SNOOZE
MICRO COMPONENT SYSTEM UX-T550
MU
LTI JOG
ACTIVE HYPER
BASS PRO
SLEEP
4
7
10
8
+10
AUX
9
6
5
AUTO
PRESET
DISPLAY
PROGRAM
RANDOM
REPEAT
BEAT CUT
REVERSE
MODE
STEREO
AUTO/MONO
MULTI CONTROL
BASS
AHB.PRO
TREBLE
REW
FF
VOLUME
TAPE
TUNER
BAND
C D
CLOCK
~
¤
@
⁄
!
Ÿ
AUTO REVERSE
A U T O T A P E S E L E C T O R
COMPACT
DIGITAL AUDIO
BAND
ONE TOUCH
REC
TAPE
OPEN
CD
TUNER
TIMER/SNOOZE
STANDBY
AUX
MICRO COMPONENT SYSTEM UX-T550
VOLUME
MU
LTI JOG
ACTIVE HYPER
BASS PRO
SLEEP
1
2
3
4
7
10
8
+10
AUX
9
6
5
AUTO
PRESET
DISPLAY
PROGRAM
RANDOM
REPEAT
BEAT CUT
REVERSE
MODE
STEREO
AUTO/MONO
MULTI CONTROL
BASS
AHB.PRO
TREBLE
REW
FF
VOLUME
TAPE
TUNER
BAND
C D
CLOCK
~
Ÿ
!
⁄
Ÿ
UX-T550(B)_body.pm6
12/12/00, 3:11 PM
12
Summary of Contents for UX-T550
Page 20: ......
