45
Note
Https is performed for setting or getting parameters, not for
video/audio stream.
Note
Please click the “Save” button to save your settings. You can also
click the left button “Reset to Default” to set all the data and
options as defaults.
FTP Server
In this page, you can activate a FTP Server to visit SD card for SD recording
result.
Cl
ick “ON” to activate the FTP function. Then you should follow the
following procedures to set up related settings. Or “OFF” to disable the FTP
function and you can skip the following procedures.
Enter a login ID if you activate the FTP function.
Enter a password associated with a login ID.
Re-enter the password to confirm it.
Determine the number of maximum connections by selecting a number
from the drop-down list in the Max Simultaneous Connections field. Note:
This
parameter is the max of FTP Client
connections
, not the max of IE Window’s
connections
.
Enter
ftp://<Login ID>:<Password>@
<ip-address> in Windows Explorer, then you will
find the SD recording result.
The original setting is ftp://admin:jvc@192.168.0.2
When you’re visiting the SD
recording files, date and time of record refers to the folder
’s and file’s name.
Figure 4-31 FTP Sever Settings
Note
Please click the
“Save” button to save your settings. You can also
click the left button “Reset to Default” to set all the data and
options as defaults.
RTSP
Authentication
You should enter the Login ID, Password and Password (confirm) if select
“ON”.
