85
Input/Output Terminal on Rear Panel
●
The VR-N1600U/E unit acts as a network encoder (IP
video server) in the system and the device name assigned
to it is
●
The input/output terminals on the rear panel have been
assigned to the
device by default.
䡵
Input Terminals
䡵
Output Terminals
Note :
●
The output duration of the rear output terminals is
indicated as 0 seconds in the output information. In actual
fact, output continues indefinitely.
●
Output events of the rear output terminals cannot be
deleted.
●
All terminal inputs are treated as alerts, but only one
terminal can be associated (Sequence) with recording
start.
Specifying a VMD Event
1
Select the camera for specifying the VMD event
from the [Defined events] list on the [I/O Setup]
screen
2
Click the [Add VMD Event(motion Detection)]
button
If a multi-camera device is selected, such as a network
encoder (IP video server), a dialog for you to select the
required camera will appear.
Note :
●
The [Add VMD Event(motion Detection)] button is
disabled if there is no VMD event available for the network
camera.
Specifying Timer Events
Timer event can be attached to a special event.
Timer event will be triggled according to the specified
duration after the occurance of the related event.
1
Select the event for adding a timer event from
the [Defined events] list on the [I/O Setup]
screen(An example of when attaching to input
event)
2
Click the [Add new event...] button
●
The [New Timer] screen appears.
3
Specify the timer interval and timer event name.
Input
Terminal
Name
Name of Input
Event
Event Description
Event during detection of
Make signal input
Even during detection of
Break signal input
Output
Terminal
Name
Name of Output
Event
Output Action
Set output
Option Out 1,2
high
Outputs the Make status
Outputs the Break status
Item
Description
A
Displays the event or event button
name for which a timer event is
added. (This is a read-only field.)
B
For specifying a name for the timer
event.
Memo :
●
Event names must not contain the
following characters: < > & ' " \ / : * ?
| [ ].
C
For specifying the time interval from
the occurrence of the event or
clicking of the event button until the
timer event is triggered. Specify the
time interval in seconds or minutes.
[I/O Setup] Screen
A
B
C
[New Timer] Screen
VR-N1600_J.book Page 85 Wednesday, August 8, 2007 3:32 PM
Summary of Contents for VR-N1600E
