15
Englis
h
Using the Tuner
You can listen to FM and AM stations. Stations can be tuned
in manually, automatically, or from preset memory storage.
■
Before listening to the radio:
• Make sure that both the FM and AM antennas are
correctly connected. (See page 4 and 5.)
Setting the AM Tuner Interval Spacing
When shipped, the AM tuner interval is set to 10 kHz
spacing.
You can change it to 9 kHz spacing.
■
Before proceeding:
1. Tune in AM stations to check the AM tuner interval
(10 kHz or 9 kHz spacing).
2. Check the positions of the VOL +/– and
%
buttons on
the Unit.
3.
Turn off the System.
To select 9 kHz intervals,
while holding down the
VOL – button on the Unit, press the
%
button on the Unit.
The Unit turns on and “AM 531kHz” will appear on the dis-
play.
To select 10 kHz intervals,
while holding down the
VOL + button on the Unit, press the
%
button on the Unit.
The Unit turns on and “AM 530kHz” will appear on the dis-
play (at the same time, the 100 kHz spacing is selected for
FM broadcast).
[9 kHz Intervals]
[10 kHz Intervals]
• When you change the setting, the preset stations are
erased. You will need to preset the stations again. (See
page 16.)
One Touch Radio
Press the FM/AM button on the Remote Control to turn on the
System and start playing the station you were last tuned to.
■
You can switch from any other sound source to the radio
by pressing the FM/AM button on the Remote Control (or
the SOURCE button on the Unit).
Tuning In a Station
1
Press the FM/AM button.
The Band and Frequency you were last tuned to appear
on the display.
(If the last station was selected using the preset number,
the preset number appears first.)
Each time you press the button, the band alternates be-
tween FM and AM.
●
Using the SOURCE button on the Unit
Each time you press the button, the sound source
changes.
2
Select a station using one of the follow-
ing methods.
●
Manual Tuning
Press the
4
PREV. or NEXT
¢
(
or
) but-
ton repeatedly to move from frequency to frequency
until you find the station you want.
OR
STEREO MONO
SOURCE
VOL
PREV.
NEXT
RETURN
SELECT
SOURCE
VOL +/–
PREV.
NEXT
STANDBY/ON
FM/AM
MD/AUX
CANCEL
MPX
SET
SLEEP
DIMMER
DISPLAY
REPEAT
VIDEO
INTRO
HIGH
LIGHT
RETURN
STILL
COLOR
CLOCK
/TIMER
OPEN
/CLOSE
VOLUME
PBC
1
2
3
6
9
+10
10
7
4
5
8
ON
SCREEN
TREBLE
BASS
AHB PRO
PREV.
CD SELECT
NEXT
FM
MODE
PLAY
MODE
VCD No.
VCD No.
FM MODE
FM/AM
SET
+10
NEXT
PREV.
Band display, Frequency display, Preset channel
FM mode indicators
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
Number
Buttons
VOL
VOL
FM
AM
FM/AM
(on the Remote Control)
SOURCE
FM
AM
MD/AUX
(on the Unit)
VS-DT68V-88V[UF]_EN.book Page 15 Wednesday, June 26, 2002 3:31 PM
