background image

1

English

English

We would like to thank you for purchasing one of our 
JVC products.
Before connecting this unit to the wall outlet, please read 
the instructions carefully to ensure that you obtain the 
best possible performance.
If you have any questions, please consult your JVC 
dealer.

Table of Contents

Introduction

Page 2

Precautions......................................................................... 2
About this manual ............................................................. 2
Names of buttons .............................................................. 3

Main unit...................................................................................3
Remote control unit .................................................................4
Display window........................................................................4

Before using for the first time

Page 5

Installing the unit............................................................... 5
Connecting to the Analog Output Jacks ......................... 5
Connecting to the Digital Output Jack............................ 5
Supplying the power......................................................... 5

To connect the AC power cord of the main unit ...................5
To install the batteries in the remote control unit.................6

COMPU LINK connection .................................................. 6

Basic operations

Page 7

Basic functions for disc playback  .................................... 7

Turning on the power of this unit...........................................7
Remote control operation .......................................................7
Inserting and removing discs .................................................7
Playing a disc ...........................................................................8
Stopping playback ...................................................................8

Locating a point to start playback  .................................. 9

Skipping to a desired disc during playback (DISC SKIP) ......9
Changing to a desired disc during playback DISC (1-7) .......9
Skipping to a desired track during playback .........................9
Searching for a desired section ..............................................9
Specifying a desired track in stop mode..............................10

Changing discs during playback (EXCHANGE)............. 10
Playing tracks in a order of disc/track number............. 10

Various playback patterns

Page 11

Playing tracks in a desired order (Program Play) ......... 11
Playing tracks in a random order (Random Play) ......... 12
Playing repeatedly (Repeat Play) ................................... 12

Repeating all the tracks of a disc ..........................................12
Repeating one track ...............................................................12

General informations

Page 13

COMPU LINK remote control system ............................ 13
Care and handling............................................................ 14
Troubleshooting .............................................................. 15
Specifications................................................................... 16

  !" #!$$$%$&'

Summary of Contents for XL-FZ700








































Reviews: