Basic operations
8
Basi
c op
erat
ions
Disc to be played back
The disc set in the front-left disc tray when the carousel
closes is loaded for playback. If no disc is set in the front-
left disc tray when the carousel closed, the unit rotates
the carousel clockwise until it finds a disc. If no disc is set
at all in the carousel, “NO DISC” will appear on the
display.
Playback operation before closing the carousel
• By pressing the
3
PLAY button on the main unit or the
3
button on the remote control unit, the carousel
closes and the disc to be played back firstly will be
played back.
• By pressing the DISC (1-7) buttons on the main unit or
the remote control unit, the specified disc will be
played back.
Playing a disc
Press the
3
3
3
3
PLAY button on the main unit or
the
3
3
3
3
button on the remote control unit.
The
3
indicator lights on the display and playback starts.
Playing a desired disc
Press a desired DISC (1-7) button.
The
3
indicator lights on the display and playback starts.
• The DISC (1-7) button without the circle in the DISC
indicator does not work.
To stop playback temporarily
Press the
8
PAUSE button on the main unit or the
8
button on the remote control unit. The
8
indicator lights
on the display and playback stops temporarily.
To resume playback, press the
3
PLAY button on the
main unit or the
3
button on the remote control unit
again.
Press the
7
7
7
7
STOP button on the main unit or
the
7
7
7
7
button on the remote control unit.
About the DISC (1-7) indicators
Each DISC indicator shows the current status of the
corresponding tray as follows:
• The circle of the DISC indicator will light if a disc is set
in the corresponding disc tray. (The numbers 1-7 are
always lit.)
• The circle is unlit if no disc is set in the corresponding
disc tray.
About the music calendar
When a disc to be played back is read, the contents (track
numbers) of the disc appear on the music calendar. As
the track is finished to play back or skipped, the track
number will disappear from the music calendar.
Playing a disc
NOTE
• All available discs are sequentially played back.
Playback will continue until you stop it. (See “Stopping
playback” on this page.)
PLAY
Main unit
Remote control unit
DISC
TRACK
TIME
STEP
1
2
3
5
6
7
4
1
2
3
4
5
6
7
8
9 10 11 12
13 14 15 16 17 18
DISC number being played back
Playback elapsed time
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
DISC 6
DISC 7
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
DISC 6
DISC 7
Main unit
Remote control unit
Stopping playback
NOTES
• Inserted disc is detected when the carousel is turned.
So, until then, the unit cannot know the disc presence
status of the disc tray. For such disc trays, the unit
temporarily turns on the corresponding indicators.
• During program play mode, the number shows the
presence of disc and the circle shows the disc being
programed.
• During random play mode, the number shows the
presence of disc and the circle shows the disc being
played back for random play.
NOTE
• During program play mode, only the programed tracks
appear on the music calendar.
STOP
Main unit
Remote control unit
PROGRAM
RANDOM
1 2 3
5 6 7
4
1 2 3 4 5 6
7 8 9 10 11 12
13 14 15 16 17 18
DISC TRACK TOTALTIME
STEP
PROGRAM
RANDOM
1 2 3
5 6 7
4
1 2 3 4 5 6
7 8 9 10 11 12
13 14 15 16 17 18
DISC TRACK
TIME
STEP
Total track number
Total Playback time
A few seconds later
& !" #!$$$%$&'
