background image

 

Begin Streaming Music

Press “       ” to start playing music. 
Press and Hold“       ”  2 seconds to play the next track. 
Press and Hold“       ” 2 seconds to play previous track. 
Press either “      ” or “      ” for volume control.

Using the Hands-Free Function

When the unit is connected and paired to a Bluetooth-enabled device 

like a smartphone ,the unit allows you to answer phone calls with its 

built-in microphone.

Press “      ” to accept a call.

To end a call press“      ”. 

To reject a call, press and hold “      ” for 2 seconds. 

Aux-In Mode

 

Plug in the supplied 3.5 mm cable into the unit. Connect the other end 

to the AUX out port on your device.The Green LED will only illuminate 

when in “Aux” mode.

Please note music and volume can be controlled on your device. 

 

Charging

Attach the USB cable to the unit, and plug into any USB charger.

If the unit is completely discharged,  it will take approximately 4

hours to fully charge.

The red LED lights up when the unit is charging. When fully charged, 

the red LED turns off.

Note:There will be a beep when the battery is low and needs to

be recharged.    

4

Summary of Contents for XS-N1249BBA








Reviews: