1
2
Danger! High Voltage! Electric Shock If Opened!
Operation with Caution! Please refer to the related
operating instructions.
Safety Information
Label for Class II Products (Dual Insulation)
To avoid fire and electric shock, never attempt to put the
unit exposed to water or in a place with high humidity.
WARNING:
Precautions:
Do not modify or use accessories not recommended by
the manufacturer.
Use the right power cord and insert it properly to avoid
electric shock.
Laser parts are used in this System. If instructions
described in this manual are not followed in operating or
adjusting the System, personnel may be exposed to
radiation.
Do not open or repair the System. Such work should be
done by qualified technicians.
Hazardous
Operation:
Do not open the System so as to avoid radiation.
Safety Information and Maintenance
Read the instructions fully before use. Retain this Instruction Manual for future
reference.
Power supply: Follow the
descriptions on the label and
use the power cord properly.
Keep all parts away from
moisture.For indoor use only.
Avoid direct sunshine and
high temperature.
Do not stretch, bend, or pull on
the power cord. Grip the plug
and not the power cord when
unplugging.
Do not open the cover. No user-
serviceable parts inside. Also
leaving the cover open may
allow foreign objects to fall into
the unit.
Remove the power cord from
outlet if you are not using the
unit for a long time.
Disc Protection
To clean a dirty disc, you should use a clean rag and clean it
in a linear way.
Keep the player, battery and disc away from environment with
moisture, rain, dust or high temperature. Keep the disc tray
closed so as to avoid dust.
When the player is suddenly moved from a cold environment
to a warm one, water can be condensed on the lens of the
player, which may lead to a problem. In this case, put the player
in the warm environment till the condensed water on the lens
is totally evaporated.
Important:
- This device is not a toy. Do not allow young children to play with the unit.
- When moving the unit, make sure that the power is turned off and the cord is
removed from the power outlet.
