Basic operations
12
XV-M5GSL/LET0236-001A/English
B
a
si
c
op
erati
ons
To resume playback
When the resume mode is “ON”
While the disc you interrupted playback is
still on the disc tray, press
3
.
The unit resumes playback from the position where playback
was interrupted. The TV screen shows [RESUME PLAY].
To play back from the beginning
Press
7
before pressing
3
to start playback.
When the resume mode is “DISC RESUME”
1
Press
0
to insert a disc for which the unit has
stored an interrupted position.
The TV screen shows [RESUME STOP].
2
Press
3
.
The TV screen shows [RESUME PLAY] and the unit resumes
playback from the position where playback was interrupted.
To play back from the beginning
After inserting the disc, press
7
before pressing
3
to start
playback.
NOTES
• If you change the [RESUME] setting from [DISC RESUME] to
[OFF] or [ON], you cannot resume playback of a disc whose
“resuming” position is stored. However, when you again set
[RESUME] to [DISC RESUME], you will then be able to resume
playback of the disc.
• If you interrupt the playback of a disc for which an interrupted
position has already been stored, the memory will be updated
with the new interrupted position.
• For a double-sided DVD VIDEO disc, the unit regards each side
as a different disc. Therefore, to resume playback of such a
disc, the disc must be inserted with the same side down.
• When the unit memorizes an interrupted point for a disc, it also
memorizes Audio, Subtitle and Angle settings.
• The unit may not resume playback exactly from the interrupted
point. In the case of an SVCD/Video CD disc with PBC function,
the unit may resume playback from a point slightly earlier or
later than the point where playback was interrupted.
Various speed playback
To advance or reverse playback rapidly
while monitoring
During playback, press
¡
or
1
on the
remote control unit.
You can select from 1.5 times, 5 times, 20 times and 60 times
normal speed. Pressing
3
returns the unit to normal
playback.
During playback, hold down
¢
or
4
.
Playback is advanced or reversed at 5 times normal speed.
NOTE
During rapid playback, the sound will be muted except when
playing an Audio CD, and when playing a DVD VIDEO or Video
CD at 1.5 times normal speed. For Audio CD discs, the sound will
be heard intermittently.
x1.5 Quick Playback with sound
When you select 1.5 times normal speed playback, the disc is
played back with sound.
• For DVD VIDEO discs, the subtitle does not go off.
• If the sound of a DVD VIDEO disc is recorded in Dolby Digital or
DTS format, stereo linear PCM signals are output. With some
DVD VIDEO discs, the sound quality and volume may alter, or
the sound may be out of tune.
• To switch from rapid reverse playback to x1.5 Quick Playback,
first press
3
, then press
¡
once.
To advance a still picture frame by frame
While paused, press
8
.
Each time you press
8
, the still picture advances to the next
frame.
Pressing
3
returns to normal playback.
3
4
4 ¢
¢
7
8
1
¡
3
7 8
0
Numeric buttons
XV-M5GSL(J).book Page 12 Monday, May 26, 2003 9:31 PM
