Setup
63
English
Display & Button Setup
1
Press the
[
HOME
]
/
[ ]
button.
2
Touch
[ ]
.
3
Touch
[
SETUP
]
.
h
h
SETUP Menu screen appears.
4
Touch
[
Display & Button
]
.
h
h
Display & Button setting menu appears.
5
Set each parameter as follows.
■
[
Dimmer
]
Select the dimmer mode.
[
OFF
]
: Does not dim the display and buttons.
[
ON
]
: Dims the display and buttons.
[
SYNC
]
(Default): Turns the dimmer function
on or off when the vehicle light control
switch is turned on or off.
■
[
OSD Clock
]
Select if you want to display the clock while
the screen is off, or while watching video files
on USB, etc.
"ON" (Default)/"OFF"
■
[
Button Illumination Color
]
You can set the button illumination color.
■
[
Wallpaper Customize
]
You can change the wallpaper image or
color.
■
[
Screen transition effect
]
Select whether to use the screen transition
effect when the source control screen is
switched to the Home screen.
"ON" (Default)/"OFF"
Ñ
Customizing the button color
You can set the button illumination color.
1
Touch
[
Button Illumination Color
]
in the
Display & Button setting menu.
2
Touch the desired color.
■
[
Variable
]
You can set the button color to continuously
scan through the color spectrum.
■
[
User
]
You can set the color created with the RGB
color mixer.
■
[
Car Color
]
This can be selected when the iDatalink
(commercially available) is connected.
3
Touch
[
]
.
To register an original color
You can register your original color.
1
Touch
[
User
]
on the Button Illumination
Color screen.
2
Use
[
-
]
and
[
+
]
to adjust each color value.
3
Touch
[
]
.
NOTE
• You can create a color based on a preset color.
Touch the preset color instead of
[
User
]
, and
adjust the color value.
