JVS Everio GZ-R50 AG, User Manual

Built-in Battery

This unit is equipped with a built-in lithium-

ion battery. Before using this Unit, be sure to

read the following cautions:

0

To avoid hazards

…

do not burn.

…

do not modify or disassemble.

…

do not expose this Unit to temperatures

exceeding 60 °C, as this may cause the

built-in battery to overheat, explode or

catch fire.

0

To prevent damage and prolong

service life

…

do not subject to unnecessary shock.

…

charge within the temperature range of

10°C to 35°C. Cooler temperatures require

longer charging time, or in some cases

stop charging at all.

Warmer temperatures prevent complete

charging, or in some cases stop charging

at all.

…

store in a cool, dry place. Extended

exposure to high temperatures will

increase natural discharge and shorten

service life.

…

keep a 30% battery level (

i

) if the

battery is not to be used for a long period

of time.

In addition, fully charge and then fully

discharge the battery every 6 months, then

continue to store it at a 30% battery level

(

i

).

…

remove the AC adapter from the unit when

not in use, as some machines use current

even when switched off.

…

do not drop intentionally or subject to

strong impact.

Recording Medium

0

Be sure to follow the guidelines below

to prevent corruption or damage to

your recorded data.

0

Do not bend or drop the recording

medium, or subject it to strong pressure,

jolts or vibrations.

0

Do not splash the recording medium

with water.

0

Do not use, replace, or store the

recording medium in locations that are

exposed to strong static electricity or

electrical noise.

0

Do not bring the recording medium near

objects that have a strong magnetic field

or that emit strong electromagnetic

waves.

0

Do not store the recording medium in

locations with high temperature or high

humidity.

0

Do not touch the metal parts.

0

When erasing data using the camcorder,

the data won’t be erased completely.

When handing over your camcorder and/

or SD card, you are recommended to erase

all of the data by either performing

“FORMAT” or “FACTORY PRESET”

operation on this unit, using commercially

available software, or by physically

destroying the camcorder.

LCD Monitor

0

To prevent damage to the LCD monitor,

DO NOT

…

push it strongly or apply any shocks.

…

place the camcorder with LCD monitor on

the bottom.

0

To prolong service life

…

avoid rubbing it with coarse cloth.

While the LCD monitor screen has more

than 99.99% effective pixels, 0.01% of the

pixels may be bright spots (red, blue,

green) or dark spots. This is not a

malfunction. The spots will not be

recorded.

4

EN