18
5. FIRST USE
Take the product out of the box. You can use
it right away as a lamp by pressing the top
button.
Press again to turn it off. Since Jasmine works
on battery, you don’t need to connect it to an
outlet. However, you may do so if you want to
keep the battery fully charged or if the battery
has discharged during shipping.
To use the SHISHA part, please screw in the
little connecting part, then clip in the tube.
Take the clearomizer, unscrew its drip tip to
open and add the e-Liquid.
Note: it doesn’t need to be full, we recommend
you fi ll it to half capacity.
Close the drip tip and screw the clearomizer
onto the tube body.
To activate the clearomizer, you have to press
the ON/OFF button on the bottom part of the
Jasmine body.
Then press the button near the clearomizer on
the tube to start vaporizing the e-Liquid. Note:
please wait over a minute before fi rst use, so
that the e-Liquid can be well absorbed in the
coil.
After use, press the ON/ OFF button on the
bottom part of the Jasmine body to turn it off.
Note: you can use one or two clearomizers as
well as the lamp independently.
LIGHT
ON/OFF
SHISHA
ON/OFF
Rear of the Body
Light button ON / OFF
Shisha button ON / OFF
7.
Fill your SHISHA with E-liquid
6.
Buttons ON/OFF
A
B
* Put the e-Liquid in the edge of the clearomizer, always avoiding the central part
*C
D
E
F
G
