PORTABLE DVD PLAYER V12M12_IM_EN_04232008
- 14 - www.jWIN.com
OPERATIONAL INSTRUCTIONS
PLAYING DVD / VCD / AUDIO CD
1. To power the unit ON, slide the POWER switch to the left, and then the unit will turn ON.
Note:
•
To see the movie on the LCD screen of JD-VD742, the LINE SELECT IN/OUT switch
must be at the ‘OUT’ position. If not, slide the LINE SELECT IN/OUT switch to the ‘OUT’
position.
2. Press the DOOR OPEN button to open up
the disc compartment door. The ‘OPEN’
indication will appear on the LCD screen.
3. Place the disc with the label side facing front
on the disc tray. Hold the disc without
touching either of its surfaces, placing the
printed title side facing up.
4. Push down the left front edge on the door to
close and secure. The disc will start playback
automatically.
Note:
•
Loading the disc in any source mode will
switch from the current mode to DISC
mode.
•
For MP3 disc, the disc reading time may
exceed a little bit longer, due to the large number of songs complied into one disc.
NOTE: If playing an MP3 Disc, MENU will appear on the LCD screen:
•
Use the navigation buttons (
/
/
/
) to select the desired item.
•
Press the ENTER button, and playback of the selected item will start.
5. Adjust the Volume knob to a comfortable level.
Note:
When in Play mode and the “STANDBY” indicator is blinking, it signifies the battery is
nearly exhausted and must be recharged.