PORTABLE DVD PLAYER V12M12_IM_EN_04232008
- 28 - www.jWIN.com
TROUBLESHOOTING
No Power
Insert the AC power plug securely into the power outlet.
It fails to start playing even when the PLAY button is pressed. It starts playing but then
stops immediately.
•
Condensation has formed. Wait about 1 to 2 hours to allow the player to dry out.
•
This player cannot play a disc other than DVD, Video CD and CD.
•
The disc may be dirty and may require cleaning.
•
Ensure that the disc is installed with the label side up.
No Picture
•
Ensure that the equipment is connected properly.
•
Ensure that LINE SELECT is set to “IN” and you are trying to play a disc.
No Sound or Distorted Sound
•
Ensure that the equipment is connected properly.
•
Ensure that the input setting for the TV and stereo system are correct.
Picture is distorted during rapid advance or rapid reverse.
The picture will be somewhat distorted at times: this is normal.
No Rapid Advance (or Rapid Reverse Play)
Some discs may have sections which prohibit rapid advance (or rapid reverse.)
No 4:3 (16:9) Picture
Choose the correct setup “TV DISPLAY” item which matches the TV set used.
No operations can be performed with the remote control unit.
•
Check the batteries are installed matching the correct polarities (+ and –).
•
The batteries may be exhausted. Replace them with new ones.
•
Point the remote control unit at the remote control sensor and attempt operation.
•
Operate the remote control at a distance of not more than 6m from the remote control sensor.
•
Remove the obstacles between the remote control unit and remote control sensor.
No key operation (by the main unit and/or the remote control unit) is effective.
•
Press the STANDBY button to set the player to the standby mode and then turn back to ON.
•
Press the STANDBY button to set the player to the standby mode, disconnect the power plug
and then reconnect it.
