PCIe/PXIe-5211 |
| 16
Timing
1) Single Mode
The counting value is written to the register on each rising edge or falling edge of the
measured signal as shown in Figure 5.
Figure 5 Simple Edge Counting in Single Mode
To configure the counter to work in this mode, set JY5211CITask.Mode to
CIMode.Single.
2) Finite/Continuous Mode with Explicit Sample Clock
The counting value is stored into the buffer on each rising edge of the sample clock
as shown in Figure 6.
Figure 6 Buffered Edge Counting with Explicit Sample Clock
To configure the counter to work in this mode, set JY5211CITask.Mode to
CIMode.Finite or CIMode.Continuous
,
and set JY5211CITask.SampleClock.Source to
CISampleClockSource.Internal or CISampleClockSource.External.
Summary of Contents for PCIe-5211
