20
2�4 Rack Mounting
JYTEK provides hardware for optional installation of the PXIe-62780 to a rack. The kit
(order name PXIe-62780 Rack Mount Kit) flexibly recesses the PXIe-62780 in the rack,
accommodating external mechanical parts on the front side, such as cables and mass
interconnect modules.
B
C
C
A
Figure 2-1: Rack Mount Assembly
A
Carrying Handle
B
4 Rubber Feet (only 2 shown)
C
Mounting Brackets
Table 2-1: Rack Mount Assembly Legend
1. Remove carrying handle from the right side
2. Remove the four rubber feet from the left side
3. Install the mounting brackets on both sides of the chassis using the provided M4
screws. Position of the mounting brackets can be adjusted via a range of screw holes
to recess the chassis in the rack by any distance
4. Install the chassis in the rack using eight screws (notincluded).
