K-array Azimut Series, Reference Manual

13

1

2

3

4

HARDWARE CONTROL SETUP

The Kommander-KA02 Azimut amplifier unit provides a 

General Purpose Input connector designed to connect up 

to four external normally open (NO) switches* to be set as a 

further remote user customizable controls.

In order to bind the remote control to an Azimut operating 

functionality (actions) follow these step: 

1.  Connect the external NO switch to the ground (GND) terminal and to 

one of the four available terminals of the flying plug;

2. 

Plug the flying plug to the Hardware Control port on the Kommander-

KA02 back panel;

3.  Open the Azimut user interface, click on the Main Menu icon and 

select Advanced;

4. 

Scroll down and find the Hardware Control section;

5.  Find the control with the number corresponding to the hardware control 

terminal where you plugged the remote switch and set the proper 

function; 

6.  Enable the remote control;
7.  Click on Save setup to make the settings effective.

Action

Parameter

mute/unmute

n/a

set volume

number of decibels (dB)

max: 24

min: -200

Increase volume

n/a

Decrease volume

n/a

play/pause

n/a

play/pause Spotify n/a

*external normally open (NO) switches 

are not provided with the Azimut 

system.

Azimut

Reference Guide