K-array Kobra KK52, User Manual

KMT12/KMT18

REV. A

8

4. UNPACKING 

Each K-array loudspeaker is built to the highest standard and thoroughly inspected before leaving the factory. 

Upon arrival, carefully inspect the shipping carton, then examine and test your new loudspeaker. If you find any 

damage, immediately notify the shipping company. Only the consignee may institute a claim procedure regarding 
the system’s electronic equipment.

5.  WARRANTY

K-array systems  are warranted against manufacturing defects in materials or craftsmanship over a period of 2 
years from the date of original purchase. During the warranty period K-array will, at its discretion, either repair or 
replace products which prove to be defective provided that the product is returned in its original packaging, shipping 
prepaid, to an authorized K-array service agent or distributor. K-array cannot be held responsible for defects caused 

by unauthorized modifications, improper use, negligence, exposure to inclement weather conditions, acts of God 

or accidents, or any use of this product that is not in accordance with the instructions provided by K-array. K-array 

is not liable for consequential damages. This warranty is exclusive and no other warranty is expressed or implied. 

This warranty does not affect your statutory rights.

6. SAFETY

• 

Professional loudspeakers are capable of 

producing extremely high sound levels and should 

be used with care. Hearing loss is cumulative and 

can  result  from  extended  exposure  to  levels  in 
excess of 90dB. 

• 

Always use loudspeaker systems in a safe manner. 
Never stand close to loudspeakers driven at high 
volume. 

• 

Only install the speaker in a location that can 
structurally support the weight of the unit. Doing 
otherwise may result in personal injury and property 
damage. 

•  The system should only be suspended by qualified 

personnel, following safe rigging practices. If 
there is any doubt, seek professional help from 
architects, structural engineers or other specialists 
before proceeding. 

•  Do not operate the speaker for an extended period 

of time if the sound is distorted. This is an indication 
of malfunction, which can cause heat build-up and 

result in a fire. 

• 

Only connect the power supply to an appropriate 
power adapter. 

• 

Do not install the speaker in wet or humid locations 
without using weather protection. 

• 

Do not allow water or any foreign object to get inside 
the speaker. Do not put objects containing liquid on, 
or near, the unit. 

•  To  reduce  the  risk  of  overheating  the  amplifier, 

avoid exposing it to direct sunlight. Do not install the 

unit near heat emitting appliances, such as a room 
heater or stove. 

•  Never  place  open  flame  sources,  such  as  lighted 

candles, near the device. 

• 

The speaker should be placed in a location that 
does not interfere with its proper cooling. 

• 

Do not attempt to disassemble the unit. The unit 
contains no user-serviceable parts. Repairs should 
be performed only by factory trained service 
personnel. 

• 

Be sure that the adapter has the correct voltage 
value.

WARNING