Kommander-KA02 I
User Guide
13
Remote Connectivity
The Kommander-KA02 I amplifier unit features a built-in hot
spot establishing a local Wi-Fi network dedicated to remote
control the amplifier with mobile devices.
The default local Wi-Fi SSID and unit IP address are printed on
a label located on the bottom plate of the Kommander-KA02 I
unit; a QR code for ease the connectivity is printed as well.
The RJ45 Ethernet port on the rear panel allows to connect the
Kommander-KA02 I amplifier unit to a local area network (LAN).
Since every host on a network must be identified by a unique IP
address, the simplest local network usually implement a router/
switch with DHCP server managing the addresses allocation:
by default the Kommander-KA02 I unit is set to obtain a local IP
address from the DHCP server.
In case a DHCP server is not present on the LAN, the unit goes
in AutoIP mode and in few seconds the amplifier automatically
self-assign an IP address in the range 169.254.0.0/16.
A static IP address can be assigned to the amplifier unit using
the amplifier’s embedded web app (Network menu).
The Kommander-KA02 I amplifiers can be controlled remotely by
a mobile device or desktop PC/MAC.
K-array Connect mobile app
K-array Connect is the mobile app that allows to
direct manage and control a Kommander-KA02 I
amplifier with a mobile device (smartphone or
tablet) wireless.
Download the K-array Connect mobile APP from
the dedicated store of your mobile device.
Embedded web app
The integrated operating system osKar features a complete
web user interface accessible over the network: connect to the
Kommander-KA02 I on a local network or wireless via its built-in
hot spot and access the web app with a web browser (Google
Chrome recommended).
K-framework3
The K-array K-framework3 is the managing and
control software dedicated to professionals
and operators looking for a powerful tool for
designing and managing a large number of
units in demanding applications. Download the
K-framework3 software from K-array website.
K-framework3
WINDOWS and OSX software
Connectivity Reset
With the unit switched on, keep pressed the RESET button
on the rear panel for 10 to 15 seconds in order to:
•
Revert the wired IP addressing to DHCP;
•
Activate the built-in Wi-Fi and reset the wireless
parameters to the default SSID name and password
Router/switch
with DHCP server
PC or MAC
Smartphone
Kommander-KA02 I
Kommander-KA02 I
K-framework3
10s