Kommander-KA02 I
User Guide
23
Specifications
General
Type
4ch switching mode, Class D Amplifier
Output Power 1
4x 50 W @ 4 Ω
Impedance
minimum 4 Ω (2 Ω PBTL)
Frequency Response
20 Hz – 20 kHz (±1 dB)
Connectors
Input:
4x BAL input: Euroblock 1.5/ 3-ST-3.81,
3.5 mm jack unBAL analog stereo AUX input,
TOSLINK optical input,
Output:
4x Speaker output over 2x Euroblock 2,5/ 4-G-5,08
Digital:
4x USB-A 2.0,
1x RJ45 Ethernet,
Bluetooth 4.1 Low Energy,
Wi-Fi IEEE 802.11 b/g/n
Built-in DSP
Grouping, Input EQ, Output EQ, Signal Routing, Level
adjustment, Dynamic Limiters, Delay
Remote control
Wi-Fi dedicated K-array Connect mobile app
Ethernet wired K-framework3 multiplatform design
and tuning software
MAINS Operating Range
Dedicated AC/DC power adapter 100-240V ~ AC, 50-
60 Hz input / 24 V, 4 A DC output
Power Consumption
20 W @ 4 Ω load, Pink noise, 1/8 rated power
Protections
Over Temp. (Power Limiting – Thermal Shutdown),
Short Circuit/Overload Output Protection, Power
Limiting, Clip Limiter/Permanent Signal Limiter, High
Frequency Protection
1
CTA-2006 (CEA-2006) Amplifier Power Standard, single channel driven.
Handling & Finishes
IP Rating
IP20
Dimensions (WxHxD)
219 x 46 x 170 mm (8.6 x 1.8 x 6.7 in)
Weight
0.7 kg (1.5 lb)
Material
Aluminum
