Kommander-KA02 I
User Guide
9
Getting Started
1. Connect the input and output signal cables according to
the configuration you want to achieve.
2. Connect the Kommander-KA02 I to its power supply and
plug the power cord to the AC mains socket.
3. Use the K-array Connect app to connect your mobile
device to the Kommander amplifier unit
4. Set the amplifier Output Configuration*: the Devices menu
will show the device(s) you can manage with the app:
press on the image of the unit to configure.
Carefully check that the factory presets match
the actual configuration of passive speakers
connected to the amplifier connectors.
5. Set the signal routing from the input channels to the
output channels in the ROUTING tab.
6. Check the signal volume in the VOLUMES tab.
7. Enjoy K-array sound!
* Azimut systems are factory configured.
Introduction
The Kommander-KA02 I is the smallest amplifier unit in
the Kommander line with an incredibly compact size of
219 x 46 x 170 mm (8.6 x 1.8 x 6.7 in).
With the backing of 200W, the Kommander-KA02 I amplifier
unit can be arranged in multiple output configurations such as
4x 50W, 2x 100W, 2x 50W + 1x 100W.
The amplifier features four balanced analog inputs and a
fiber optical input working up to 192 kHz. It boasts Bluetooth
connectivity, mini jack input and USB ports for using MP3, WAV,
FLAC, AAC, ecc., files.
Enhanced performance and easy tuning are managed by the
Integrated Electronic Brain – IEB – implemented into the amplifier
unit. More than a traditional DSP, the built-in micro electronics
driven by the integrated operating system osKar features
expansive sound processing – input gain, signal routing matrix,
delay, full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/
Lo Butterworth) and on-board preset –, offering complete user
control over the system performance.
