9
Connection to a single Thunder-KS
1. Ensure the Wi-Fi of the mobile device is on.
2. Launch the K-array Connect app.
a. In Android based systems the app looks for any
Wi-Fi network whose SSID name starts with
“K-array”; swipe down to force refresh the list of
available networks.
b. Touch the device name to estabish a connection
and insert the password (see below).
3. If the list of available devices is empty touch the SCAN
QR CODE button and use the mobile device camera
to frame the QR code at the top left corner of the
Thunder-KS rear panel: this provides the mobile device
to connect to the Thunder-KS Wi-Fi network.
4. Enter the password to connect to Thunder-KS active
subwoofer. If not modified, the default password is
12345678
5. The the K-array Connect app connects directly to the
Thunder-KS active subwoofer.
* The on-board web interface is a further user interface embedded on the
built-in DSP that allows to manage the system features over a network (see
“On-Board Web App”, page 13 for details). The K-array Connect mobile
app offers a shortcut to access the on-board web interface.
Thunder-KS
User Guide
List of available
devices in the
network
Main menu
Tab menu
Access the device
on-board web app *
Make the device
LED blinking
Scan device
QR code for
remote access
P R E L I M I N A R Y
