8
AES3
OUT
AES3
IN
AES3 Digital Input
The Thunder-KS active subwoofer accepts a couple of digital
signals via the AES3 digital input on the connector labeled
AES3 IN.
The digital input signals are routed internally to the input
channels 3 and 4 and mirrored on the AES3 OUT connector.
The digital input and output channels share the same
XLR connectors as the analog channel 2: CH2 » AES3 IN
and LINK » AES3 OUT respectively. In order to toggle the
connectors to manage either the analogue or the digital
signals, the K-array Connect mobile app provides a dedicated
selector in the Routing interface.
Refer to paragraph “K-array Connect Mobile App”, page 8
for details about the mobile app user interface.
K-array Connect Mobile App
The K-array Connect mobile app is designed
to allow any Android or iOS mobile device
(smartphone or tablet) to connect and manage
any Thunder-KS active subwoofer via the Wi-Fi
connection.
Connection and Discovery
The K-array Connect mobile app can connect to the
Thunder-KS active subwoofers both directly to the built-in
Wi-Fi and wireless to an access point connected to a LAN
where the Thunder-KS are wired to.
Thunder-KS
User Guide
AES3 IN and AES3 OUT
connectors
Toggle XLR2 input
analogue/AES3
Passive Subwoofer
Passive Subwoofer
Active Subwoofer
Active Subwoofer
Active
Subwoofer
Wireless connection
to a Thunder-KS
subwoofer
Wireless connection
to a network of
Thunder-KS subwoofers
P R E L I M I N A R Y
