34
Fig. 5.8 parameter window ―Air condition‖ (1byte)
Parameter “Air condition active”
This parameter defines whether air-condition control function is active. Options:
Active
Inactive
If selecting ―active‖, the following parameters will be visible.
Parameter “Setpoint can be changed by bus”
The parameter defines whether the setpoint can be changed via bus. Options:
No
Yes
With the setting ―Yes‖, the setpoint can be changed via the object ―Setpoint‖.
Parameter “Send setpoint value”
This parameter is used to set how to send the temperature setpoint value to the bus via the
object ―Setpoint‖. Options:
No send
Only after change
Send cyclically
If ―no send‖ is set, the setpoint value will always be updated but not sent.
With the ―Only after change‖ setting, the setpoint value is only sent if the setpoint value
changes.
If ―Send cyclically‖ is set, the setpoint value will be sent cyclically to the bus via the object
