38
5.10. Parameter window“RGB LED dimming”
Parameter window ―RGB LED dimming‖ can be shown in fig. 5.10. Here set RGB LED
dimming. When the function is activated, the dimming objects will be visible. R (red), G (green) and
B (blue) three-channel colour have their own corresponding object. Via their own object can make
the three colour change, as well as superposition and change the three colours can get a variety of
colour. Therefore, we can regulate optionally landscape lamp, lighting or other RGB LED to one of
ourselves favorite atmosphere through the function.
Fig. 5.10 parameter window ―RGB LED dimming‖
Parameter “RGB LED dimming active”
This parameter defines whether RGB LED dimming function is active. Options:
Active
Inactive
If selecting ―active‖, the following parameter will be visible.
—
Parameter “Interval period=entry*0.1s”
This parameter is used to set the interval period which each group object (including R, G and B
dimming objects) sends out their values on the bus. Options: 1…10
Note: the parameter is mainly used to limit the telegrams that are sent for RGB dimming,
it may not be very exact.
—
Parameter “Sending of objects”
This parameter is used to specify whether values of all dimming objects for each operation are
sent out or only if values of the objects have changed since the last sending out. Option:
For operation
For change of value
