background image

12

13

The milk frother won‘t start

Check that the frother is correctly positioned on the base. Check that the whisk is properly fixed inside 
the jug. The base connector must be dry. 

The froth is poor in quality or the milk is burnt

For the best foam, use cold, fresh whole or semi-skimmed milk straight from the refrigerator (4-6°C). 
Milk that has been frozen, or enriched, flavoured or reconstituted powdered milk, are not suitable.

Never add other ingredients such as syrup, sugar, cocoa or chocolate powder to the jug while it is in 
use. This may damage the coating. 

Ensure that the milk frother and whisk are clean.

All four buttons are blinking rapidly

A. The unit may be too hot.

 

  • Check that the whisk is correctly fitted.
  • If necessary, remove the jug from the base and hold it under cold water.

B. The bottom connector is not correctly positioned on the base.
C. There is water on the base or on the bottom of the jug.

The milk boils over

The jug has been overfilled with milk.

•  Always fill the jug only to one of the two maximum levels shown - depending on the current task.

•  Carefully lift the jug from the base, empty it out and rinse out with warm water. Then unplug the base  
  from the power supply and clean, if necessary, with a soft damp cloth.

After Sales Support:

If you have any queries or suggestions, please 

send us an email or call us on:

 

info@k-fee.com.au

  AU:

 1800 469 373 

(free of charge on land lines; 

or information on mobile phone surcharges, please contact your mobile phone 

provider.)

 

www.k-fee.com.au

Model:

 K-fee 34-360

We advise you to keep the original packa ging so 

that you can return the machine to an authorised 

customer centre in case repairs are necessary.

220 – 240V~, 50 HZ,  

500 W

0,6 m

A = ca. 130 mm 

B = ca. 220 mm

ca. 0,9 kg

A

B

Frequently asked questions

Technical Data and Service

The packaging is recyclable. Contact the appropriate department in your municipality for 

further information on local recycling. Protecting the environment is our greatest com-

mon responsibility.

The appliance contains valuable materials which can be recycled and reused. For this  

reason, contact your local waste management recycling centre for correct disposal.

Disposal information

Summary of Contents for Lattaero










Reviews: